CZ's P-10 pistol features a grip angle which avoids that "brick-in-the-hand" feeling that has plagued many in the striker-fired genre, allowing it to point naturally. Its trigger is designed to minimize creep and stacking, and rebounds with a short, positive reset, meaning single shots can be meticulously placed while follow-ups are effortless. The fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible. It features an ambidextrous slide release and swappable mag release.

Polymer fiber reinforced frame, 12rnd magazines, 3.5" barrel and an overall weight of 24.4 oz. Ships with 2 magazines, case and manual.

The CZ grip angle, helps the P-10S avoids that 'brick-in-the-hand' feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10S fit a wide variety of hands. The P-10S's trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb. pull and rebounds with a short, positive reset - meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical sights allow for one-handed manipulation of the slide on a belt. Like all CZ pistols, the P-10S is built with CZ's legendary cold hammer forged barrel. This model has a 10RD capacity.

The sub-compact variant in the P-10 line, the S is small and light for comfortable everyday carry. With a bevy of stand-out features that have made the P-10 line a success, the P-10 S has a crisp trigger, superior ergonomics and rugged reliability that set it apart from many in the striker-fired crowd. A reversible magazine release takes just a few minutes work to swap so that lefties can manipulate it with their thumb from the right side of the pistol. Two 10RD Magazines.

CZ Shadow 2 Black & Blue takes all the great features from the previous Shadow and improved upon them. Comes equipped with a higher beavertail and undercut trigger guard. Swappable mag release has an adjustable, extended button with three settings to allow shooters to set it in the spot most comfortable for them. New trigger components give smooth DA and crisp, clean SA while drastically reducing trigger reset. Target sights — fiber optic on front and a serrated, black HAJO rear (click adjustable for elevation, drift adjustable for windage). 4.89" Barrel and ambidextrous manual safety. Ships with case, manual and three 17 round magazines.

The CZ Shadow 2 Compact is an ideal compact sized firearm for users and fans of the Shadow 2 models, which are popular choices among competitors and range shooters. The new model will come with 15RD magazine capacity, 30oz in overall weight, 4" barrel, aluminum alloy frame and fiber optic front sight and adjustable checkered rear sight. These models will also be Optics Ready.

The CZ75D PCR model features an alloy frame, decocker, lanyard loop, fixed luminescent sights and two 15 round magazines. Comes with a hard carry case and manual.

The CZ Tactical Sport has now evolved into the TS 2. Mimicking the slide profile of the Shadow 2, reciprocating weight is focused as low as possible. Paired with a redesigned frame and improved ergonomics, muzzle flip is less noticeable than ever. Front and rear cocking serrations make slide manipulation easy and a set of fixed target sights with a fiber optic front . Aluminum grips, aggressive checkering and a magwell cap it off. The TS 2 will accept a wide variety of custom parts available for the Tactical Sport platform. Ships with three 20RD magazines.

The CZ75B model is based on the familar and highly regarded CZ75 9mm pistol design used by Law Enforcement and Military forces worldwide. The finish is a matte black polycoat. This gun features a single side thumb safety only, fixed sights and two 16 round magazines. Comes with a hard carry case and manual.

The CZ 75 SP-01 is the first full size handgun (4.6" bbl) from CZ to feature the improved manufacturing technology and ergonomics of the NATO-approved CZ 75 Compact P-01 model. Based on the CZ 75 DA/SA platform, the SP-01 features an integral 1913 accessory rail on the dust cover, rubber grip panels, and CZ's corrosion resistant black polycoat finish. It utilizes an extended beavertail to protect the shooter's strong hand as well as allowing for a deeper and more secure grip. The grip geometry, checkering in key areas on the front and back straps, and redistribution of mass provided by the accessory rail noticeably decreases the perceived recoil from previous models and allows for more rapid target acquisition and transition.

The SP-01 was designed as a military and duty sidearm, and thanks to its exceptional accuracy and superior handling characteristics, the CZ 75 SP-01 has also found supporters in the field of sport and target shooting. This model has a fiber optic front sight and serrated fixed rear, an 18+1 9mm capacity, utilizes a manual safety, safety stop on the hammer, and firing pin block safety.

The next generation of the Bren, the Bren 2 Ms makes first landfall in the US in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun.

Gone is the reciprocating charging handle, replaced with one that stays stowed in the forward position until it is needed. Swappable from side to side, it does double duty as a forward assist. Also added is an AR-style bolt catch/release system that is mirrored on both sides of the firearm, as well as a catch/release nestled into the front of the trigger guard. The magazine release and safety are also ambidextrous and located in very familiar locations for anyone versed in the AR platform.

In pistol form, the Bren 2 Ms comes with a flush rear plate that has the provision for attaching a AR-style buffer tube for the installation of an arm brace, cheek rest or similar pistol stabilizing device. For those who wish to SBR, a Carbine buffer tube and stock can be installed or the entire rear plate can be removed and replaced with a factory folding/adjustable stock.

Must ship to a U.S. FFL dealer

CZ's first entry into the striker market, the P-10 Compact checks all the boxes of a rugged, durable, ergonomic pistol, while still retaining the CZ quality and shootability that all CZ's are known for. Taking notes from various deficiencies and quirks of other striker pistols, CZ started with a natural grip angle, a deep cut beavertail, aggressive backstrap and frontstrap checkering, and three interchangeable backstraps to improve overall ergonomics as well as fit a wide variety of hand sizes. To address the trigger, CZ developed a crisp 4.5-5lb pull with minimal creep and stacking, with an ultra-crisp and short reset, ideal for a duty or carry pistol. Additional features include quick and easy takedown, metal three dot sights, durable Nitride finish, cold hammer forged barrel, and a compact 15+1 grip, the P-10C is the complete package. One change madeto the P-10s is the switch to a swappable magazine release. With a change in geometry, the goal was to eliminate the stiffness some customers experienced as the magazine release broke in, even though it became smooth after some use. This new reversible release just requires a few minutes to swap, allowing the P-10 to remain lefty-friendly (replaces SKU: 91520). Comes with two 15RD magazines, two spare backstraps, manual, lock and case.

With CZ reliability, engineered ergonomics and a bevy of features both familiar and new, the P-10 is the complete package. The CZ grip angle, helps the P-10 avoids that 'brick-in-the-hand' feeling that has plagued many in the striker-fired genre, allowing it to point naturally. A mild palm swell, deep beavertail and three interchangeable backstraps make the P-10 fit a wide variety of hands. The P-10's trigger is designed to minimize creep and stacking, and after initial break-in averages a clean 4.5-5 lb. pull and rebounds with a short, positive reset - meaning single shots can be meticulously placed while follow-ups are effortless. Built to withstand the rigors of military use, its fiber-reinforced polymer frame and hardy nitride finish are made for the daily grind. A generous trigger guard allows use with gloved hands while being undercut to allow as high a grip as possible, and a set of metal tactical sights allow for one-handed manipulation of the slide on a belt. Like all CZ pistols, the P-10 is built with CZ's legendary cold hammer forged barrel. The 'C' in the name indicates that it is compact in both frame and slide size, and magazines are of the same family as the hammer-fired P-07, with this model having a 10RD capacity.

Ships with two 19RD magazines and hard case. Must ship to a U.S. FFL dealer

These brand new P01 CZ 75D Compact models feature a decocker, M3 rail, lanyard loop, fixed luminescent sights and two 14 round magazines. Comes with a hard carry case and manual.

The CZ P-07 is the updated version of the CZ 75 P-07 Duty. It features a nitrated slide finish that wears longer and has increased corrosion resistance. The pistol as a whole has been dehorned, removing any sharp edges to make it more comfortable for all-day carry. It also features small, medium and large backstraps and an integrated 1913 Picatinny rail on the dust cover. The P-07 also has an updated trigger shape, as well as a snag-free hammer and forward cocking serrations. This model has a 3.75" barrel, black polymer frame and comes with a 15-round magazine.

Building on our most popular firearm, the CZ Scorpion 3+ is an enhanced Scorpion model featuring upgrades most requested by our customers.

With backwards compatible magazines, an ambidextrous mag release and bolt catch, improved sights and upgraded grip ergonomics the Scorpion 3 + offers the operator an exceptional shooting experience on the range, as well as confidence and security at home. 4.2" threaded barrel (1/2x28), 4.7LBS and ships with 20RD magazines.

Included are two 10-round magazines, slide catch and 3 color-coded recoil springs for use with a variety of ammunition.

When used in competition-oriented or modified 75 series pistols like the Shadow, a factory-weight 75 mainspring may be required to provide proper primer ignition.

Fits: CZ 75 Shadow 2 only. Not compatible with other CZ 75 models.