The Ruger Mark IV Rimfire Pistols have the classic look of the Mark III with a simple, one-button takedown for quick and easy field stripping. A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. The bolt simply slides out of the receiver and the barrel can be properly cleaned from chamber to muzzle. The MKIV includes other significant improvements such as a one-piece grip frame that is precision CNC-machined from a solid piece of aluminum alloy; an ambidextrous manual safety and a redesigned bolt stop for more ergonomic operation. The magazine drops free on release for faster reloads and a redesigned magazine disconnect safety prevents discharge when the magazine has been removed. Internal improvements include changes to the hammer, sear, bolt and firing pin for smoother, more reliable feeding. Specific features vary by model, but the legendary, one-piece barreled receiver and internal cylindrical bolt construction remain the same. The robust design ensures permanent sight-to-barrel alignment and higher accuracy potential than conventional moving-slide designs. Includes two 10-round magazines.

USED LIKE NEW

Ruger's GP100 revolver features a triple-locking cylinder that is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation. Its patented transfer bar mechanism provides an unparalleled measure of security, while the integrated sub-assemblies allows for easy maintenance and assembly. The grip frame design easily accommodates a wide variety of custom grips. This Standard model has a stainless steel 3" barrel, frame, and cylinder. It also has a black Hogue Monogrip and a red ramp front sight with an adjustable rear.

Ruger and Magpul Industries are proud to introduce the RXM 9mm pistol. In the competitive 9mm polymer-frame striker-fired pistol market, the RXM sets itself apart. The RXM offers maximum flexibility and customization via a removable stainless steel Fire Control Insert (FCI) set inside an interchangeable Magpul Enhanced Handgun Grip (EHG). As part of their ongoing collaboration, Ruger and Magpul will be offering a variety of grip frames so that consumers can customize their pistol to meet shifting tastes and needs. The Magpul EHG offers consumers premium features, including Magpul's 3/4-scale TSP texture, which provides a comfortable, secure grip. Other EHG features include: textured indexing pads for consistent finger/ thumb placement; a low-profile, flared magazine well for quick and easy magazine insertion; a trigger guard undercut and beaver tail that promote a high grip for better control; a magazine release scallop for easy access; and a universal-pattern accessory rail for use with a variety of lights and lasers. The RXM's slide features a black FNC-nitride finish and allows for direct optic mounting of RMR, Delta Point Pro (DPP), and RMSc pattern optics. Co-witness-height steel sights feature a tritium night front sight, providing an excellent sight picture, with or without an optic installed. Front cocking serrations and a precision-rifled barrel complete the premium slide assembly. The pistol is equipped with a flat-faced trigger and an easily actuated magazine release, slide release and takedown lever, but the best features are the ones you add. Developed with customization in mind, the RXM pistol uses major components designed to operate in Gen 3-type pistols and is compatible with many off-the-shelf holsters and accessories.

Ruger's Mark IV features a simple, one-button takedown for quick and easy field-stripping and proper chamber to muzzle cleaning. The recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. Its internal cylindrical bolt construction ensures permanent sight to barrel alignment, while the contoured ejection port and easy-to-grasp bolt ears allow for durable and reliable operation. The accurate sighting system features a drilled and tapped receiver for Weaver- or Picatinny-style rail. The Mark IV is a single action and utilizes an ambidextrous manual safety, push-button magazine release located on the left side, and an ergonomic bolt stop. Included is a washer and two magazines. This 22/45 Lite model features an aerospace-grade aluminum, ventilated receiver with a black anodized finish. It also has a threaded 4.4" barrel, black polymer grip frame, checkered 1911-style grip, and a fixed front sight with an adjustable rear.

Ruger's Mark IV features a simple, one-button takedown for quick and easy field-stripping and proper chamber to muzzle cleaning. The recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. Its internal cylindrical bolt construction ensures permanent sight to barrel alignment, while the contoured ejection port and easy-to-grasp bolt ears allow for durable and reliable operation. The accurate sighting system features a drilled and tapped receiver for Weaver- or Picatinny-style rail. The Mark IV is a single action and utilizes an ambidextrous manual safety, push-button magazine release located on the left side, and an ergonomic bolt stop. Chambered in 22lr with a 4.4" threaded barrel. Included is a washer and two magazines.

Must ship to a U.S. FFL dealer

Ruger's Mark IV features a simple, one-button takedown for quick and easy field-stripping and proper chamber to muzzle cleaning. The recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. Its internal cylindrical bolt construction ensures permanent sight to barrel alignment, while the contoured ejection port and easy-to-grasp bolt ears allow for durable and reliable operation. The accurate sighting system features a drilled and tapped receiver for Weaver- or Picatinny-style rail. The Mark IV is a single action and utilizes an ambidextrous manual safety, push-button magazine release located on the left side, and an ergonomic bolt stop. Included is a washer and two magazines. This 22/45 Lite model features an aerospace-grade aluminum, ventilated receiver with a black anodized finish. It also has a threaded 4.4" barrel, black polymer grip frame, HOGUE BLK/PURPLE G10 grip, and a fixed front sight with an adjustable rear.

The Ruger Mark IV Rimfire Pistols have the classic look of the Mark III with a simple, one-button takedown for quick and easy field stripping. A recessed button in the back of the frame allows the upper receiver to tilt up and off of the grip frame without the use of tools. The bolt simply slides out of the receiver and the barrel can be properly cleaned from chamber to muzzle. The MKIV includes other significant improvements such as a one-piece grip frame that is precision CNC-machined from a solid piece of aluminum alloy; an ambidextrous manual safety and a redesigned bolt stop for more ergonomic operation. The magazine drops free on release for faster reloads and a redesigned magazine disconnect safety prevents discharge when the magazine has been removed. Internal improvements include changes to the hammer, sear, bolt and firing pin for smoother, more reliable feeding. Specific features vary by model, but the legendary, one-piece barreled receiver and internal cylindrical bolt construction remain the same. The robust design ensures permanent sight-to-barrel alignment and higher accuracy potential than conventional moving-slide designs. Includes two 10-round magazines.

Ruger's GP100 revolver features a triple-locking cylinder that is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation. Its patented transfer bar mechanism provides an unparalleled measure of security, while the integrated sub-assemblies allows for easy maintenance and assembly. This Lipseys Exclusive has a stainless steel frame, Adjustable rear sight with Hiviz Front, 4" barrel, black rubber grip with hardwood insert and chambered in .357 Magnum.

The Ruger GP100 Double-Action Revolvers are among the most comfortable shooting revolvers. The triple-locking cylinder is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation shot after shot. It's patented grip frame design easily accommodates a wide variety of custom grips and the patented transfer bar mechanism provides an unparalleled measure of security against accidental discharge. With no special tools required, maintenance and assembly is easy.

GP100 Standard is a 6 shot, .357 magnum double action revolver with a 4.2" barrel. Alloy steel, Hogue rubber grips, adjustable rear sight and ramped front sight.

The Ruger GP100 Double-Action Revolvers are among the most comfortable shooting revolvers. The triple-locking cylinder is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation shot after shot. It's patented grip frame design easily accommodates a wide variety of custom grips and the patented transfer bar mechanism provides an unparalleled measure of security against accidental discharge. With no special tools required, maintenance and assembly is easy.

GP100 Standard is a 6 shot, .357 magnum double action revolver with a 4.2" barrel. Stainless steel, Hogue rubber grips, adjustable rear sight and ramped front sight.

Ruger's GP100 revolver features a triple-locking cylinder that is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation. Its patented transfer bar mechanism provides an unparalleled measure of security, while the integrated sub-assemblies allows for easy maintenance and assembly. The grip frame design easily accommodates a wide variety of custom grips. This Standard model has a stainless steel 4.2" barrel, frame, and 7 round cylinder. It also has a black rubber grip with a hardwood insert and a fiber optic front sight with an adjustable rear.

Ruger's GP100 revolver features a triple-locking cylinder that is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation. Its patented transfer bar mechanism provides an unparalleled measure of security, while the integrated sub-assemblies allows for easy maintenance and assembly. The grip frame design easily accommodates a wide variety of custom grips. This Standard model has a blued 6" barrel, frame, and cylinder. It also has a black Hogue Monogrip and a red ramp front sight with an adjustable rear.

The Ruger GP100 Double-Action Revolvers are among the most comfortable shooting revolvers. The triple-locking cylinder is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation shot after shot. It's patented grip frame design easily accommodates a wide variety of custom grips and the patented transfer bar mechanism provides an unparalleled measure of security against accidental discharge. With no special tools required, maintenance and assembly is easy.

GP100 is a 7 shot, .357 magnum double action revolver with a 2.5" barrel. Stainless steel, black rubber grips with engraved wood, adjustable rear sight and fiber optic front sight.

Compact and lightweight, the LCP II is designed to fit a variety of holsters. It has a rugged construction with through-hardened steel slide and one-piece, high-performance, glass-filled nylon grip frame. Textured grip frame provides a secure and comfortable grip, while a larger grip frame surface provides better distribution of recoil forces. Fixed front and rear sights are integral to the slide, while the hammer is recessed within the slide. Includes finger grip extension floorplate that can be added to the magazine for comfort and improved grip. The LCPII Utilizes Ruger's safe, reliable and proven Secure Action fire-control system that combines a protected internal hammer with a bladed-safety trigger. Safety features include an integrated trigger safety; neutrally balanced sear with significant engagement and strong spring tension; and hammer catch to help prevent the hammer from contacting the firing pin unless the trigger is pulled. This model comes with a Lite Rack system which includes refined slide serrations, pronounced cocking ears and a lighter recoil spring allowing for easy slide manipulation. 10 round magazine included.

Compact and lightweight, the LCP II is designed to fit a variety of holsters. It has a rugged construction with through-hardened steel slide and one-piece, high-performance, glass-filled nylon grip frame. Textured grip frame provides a secure and comfortable grip, while a larger grip frame surface provides better distribution of recoil forces. Fixed front and rear sights are integral to the slide, while the hammer is recessed within the slide. Includes finger grip extension floorplate that can be added to the magazine for comfort and improved grip. The LCPII Utilizes Ruger's safe, reliable and proven Secure Action fire-control system that combines a protected internal hammer with a bladed-safety trigger. Safety features include an integrated trigger safety; neutrally balanced sear with significant engagement and strong spring tension; and hammer catch to help prevent the hammer from contacting the firing pin unless the trigger is pulled.

10RD magazine included.

TALO Edition with Black Frame and Cobalt Cerekote Slide.

Ruger's LCR is a lightweight, small-frame revolver with a uniquely smooth trigger and highly manageable recoil. It features a monolithic frame with a grip peg allowing for use of a variety of grip styles, and an extensively fluted, high-strength stainless steel cylinder with a PVD finish for excellent durability. The patented, friction-reducing cam is a next generation design in fire control systems resulting in a smooth, non-stacking trigger pull. Its patented, polymer fire control housing holds the fire control components in their proper dimensional relationships, reduces weight significantly, and helps reduce recoil. LCR revolvers have a replaceable, pinned ramp front sight with white bar. LCRx models feature an external hammer that allows it to be fired in single-action mode. LCRx revolvers in 22 Long Rifle have a frame made from aerospace-grade, 7000 series aluminum. This model has a matte black finish with a 3" barrel, adjustable black blade rear sight, and is fitted with a full-sized black Hogue Tamer Monogrip.