The new Galil ACE GEN II is a continuation of the Galil ACE, which is based on the reliable mechanics of the original Galil rifle first developed by IMI in the late 1960’s. Drawing inspiration from the legendary Russian AK-47 and the Finnish Valmet RK 62, the IWI Galil family has been continuously improved over the last 50 years, resulting in today’s extremely reliable and highly accurate Galil ACE GEN II.

Improvements made since the original Galil was first developed and Galil ACE include:

• Charging handle (reciprocating) on the left side of the milled steel receiver allowing for weak hand operation.
• Weight reduction with the use of modern polymers.
• AKM/AK-47 magazine compatibility. (Note that the Galil ACE GEN II rifle is assembled in the US from imported and US parts under 18 U.S.C § 922(r). You should only use magazines made in the USA in your Galil ACE GEN II rifle. Use of an imported magazine may put you in violation of 18 U.S.C § 922(r).)
• Full length 2-piece Picatinny style top rail. (GEN II)
• Free Float M-LOK rail forearm. (GEN II)
• Updated Trigger profile. (GEN II)
• Updated and shorted safety profile and throw. (GEN II)
• Side folding adjustable telescoping buttstock with M4 stock compatibility. Rifles ship with Magpul CTR and riser.

Must ship to a U.S. FFL dealer

The Tavor 7 is the next evolutionary step in the Tavor bullpup family. Based on requests from military and civilian customers alike, the Tavor 7 is IWI's introduction into the 7.62x51 bullpup rifle offering. The Tavor carries the usual reliability expected of all IWI products with some increased ergonomic features. This includes the ability to lock the charging handle without the use of the bolt catch. It also maintains the M4 type ambidextrous magazine release system and 45 degree ambidextrous safety. Chambered in 7.62x51, Black in color and ships with one 20rnd magazine.

Must ship to a U.S. FFL dealer

The Tavor TS12 12 gauge shotgun is a gas regulated bullpup shotgun that can be configured for either right or left side ejection and operation. It feeds from one of three magazine tubes which can hold four 3 inch shotgun shells or five 2 3/4 inch shotgun shells. This means that the potential magazine capacity is 15 rounds plus one additional round in the chamber.

Utilizing key features from the TAVOR TAR-21 bullpup rifles, the X95 is the next generation bullpup. An updated trigger pack features a 5-6lb pull, repositioning of the ambidextrous magazine release to the AR15 style, a forearm with picatinny rails at the 3, 6, and 9 o' clock positions with removable rail covers, relocation of the charging handle closer to the user's center mass, modular pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard and a smaller, lower profile bolt release button. Optional 9mm and .300 blackout conversions will be available in the future. Front and rear folding sights. Comes with one 30RD magazine.

The IWI US CARMEL rifle is a semiautomatic, short stroke, gas piston rifle. Made from superior steel, aviation grade aluminum and high strength impact modified polymer for outstanding performance in all environmental conditions. The rifle has a locking, rotating bolt system ensuring maximum safety for the user. IWI US CARMEL is fully ambidextrous and can be easily customized with MLOK rails at the 3, 6 and 9 position to allow compatibility with various accessories.

The new Galil ACE GEN II is a continuation of the Galil ACE, which is based on the reliable mechanics of the original Galil rifle first developed by IMI in the late 1960’s. Drawing inspiration from the legendary Russian AK-47 and the Finnish Valmet RK 62, the IWI Galil family has been continuously improved over the last 50 years, resulting in today’s extremely reliable and highly accurate Galil ACE GEN II.

Improvements made since the original Galil was first developed and Galil ACE include:

• Charging handle (reciprocating) on the left side of the milled steel receiver allowing for weak hand operation.
• Weight reduction with the use of modern polymers.
• AKM/AK-47 magazine compatibility. (Note that the Galil ACE GEN II rifle is assembled in the US from imported and US parts under 18 U.S.C § 922(r). You should only use magazines made in the USA in your Galil ACE GEN II rifle. Use of an imported magazine may put you in violation of 18 U.S.C § 922(r).)
• Full length 2-piece Picatinny style top rail. (GEN II)
• Free Float M-LOK rail forearm. (GEN II)
• Updated Trigger profile. (GEN II)
• Updated and shorted safety profile and throw. (GEN II)
• Side folding adjustable telescoping buttstock with M4 stock compatibility. Rifles ship with Magpul CTR and riser.

Must ship to a U.S. FFL dealer

The new Galil ACE GEN II is a continuation of the Galil ACE, which is based on the reliable mechanics of the original Galil rifle first developed by IMI in the late 1960’s. Drawing inspiration from the legendary Russian AK-47 and the Finnish Valmet RK 62, the IWI Galil family has been continuously improved over the last 50 years, resulting in today’s extremely reliable and highly accurate Galil ACE GEN II.

Improvements made since the original Galil was first developed and Galil ACE include:

• Charging handle (reciprocating) on the left side of the milled steel receiver allowing for weak hand operation.
• Weight reduction with the use of modern polymers.
• AKM/AK-47 magazine compatibility. (Note that the Galil ACE GEN II rifle is assembled in the US from imported and US parts under 18 U.S.C § 922(r). You should only use magazines made in the USA in your Galil ACE GEN II rifle. Use of an imported magazine may put you in violation of 18 U.S.C § 922(r).)
• Full length 2-piece Picatinny style top rail. (GEN II)
• Free Float M-LOK rail forearm. (GEN II)
• Updated Trigger profile. (GEN II)
• Updated and shorted safety profile and throw. (GEN II)
• Side folding adjustable telescoping buttstock with M4 stock compatibility. Rifles ship with Magpul CTR and riser.

Must ship to a U.S. FFL dealer

The modernized Galil Ace is based upon the reliable mechanism of the original Galil assault rifle, and continuous improvements have resulted in an extremely reliable and highly accurate Galil Ace. Modernizations include weight reduction due to use of modern polymers, increased magazine compatibility, and a left-side charging handle (reciprocating) allowing for weak hand operation. The milled steel receiver is topped with a two-piece, full-length Picatinny rail, and it has a Picatinny style tri-rail forearm with built in, slide on/off rail covers with pressure switch access. The Galil Ace features fully adjustable iron sights with a Tritium front post and 2-dot Tritium rear aperture. Galil Ace SB models feature a side-folding stabilizing brace (produced for IWI US by SB Tactical). With the unique side-folding feature, the Galil Ace SB can be fired with or without the brace extended depending on the shooters need. With the brace folded, storage space required in your safe or range/rifle bag is minimized.

The modernized Galil Ace is based upon the reliable mechanism of the original Galil assault rifle, and continuous improvements have resulted in an extremely reliable and highly accurate Galil Ace. Modernizations include weight reduction due to use of modern polymers, increased magazine compatibility, and a left-side charging handle (reciprocating) allowing for weak hand operation. The milled steel receiver is topped with a two-piece, full-length Picatinny rail, and it has a Picatinny style tri-rail forearm with built in, slide on/off rail covers with pressure switch access. The Galil Ace features fully adjustable iron sights with a Tritium front post and 2-dot Tritium rear aperture. Galil Ace SB models feature a side-folding stabilizing brace (produced for IWI US by SB Tactical). With the unique side-folding feature, the Galil Ace SB can be fired with or without the brace extended depending on the shooters need. With the brace folded, storage space required in your safe or range/rifle bag is minimized. This model is chambered for 5.56 NATO (5.56x45mm) ammo and is compatible with NATO STANAG magazines. It has an 8.3" cold hammer-forged, CrMoV, chrome-lined barrel with a 1:7" twist. OAL is 19.5" folded and 27.5" with the brace extended.

The modernized Galil ACE is based upon the reliable mechanism of the original Galil assault rifle first developed by IMI in the late 1960’s. Drawing inspiration from the legendary Russian AK-47 and the Finnish Valmet RK 62, the IWI Galil ACE has been continuously improved over the last 40+ years, resulting in today’s extremely reliable and highly accurate Galil ACE.

Improvements include:

• Charging handle (reciprocating) moved to the left side of the milled steel receiver allowing for weak hand operation
• LR/SR25 magazine compatibility.
• Weight reduction with the use of modern polymers
• Full length 2-piece Picatinny top rail
• Picatinny tri-rail forearm with built in, slide on/ off rail covers with pressure switch access
• Side Folding adjustable telescoping buttstock with 2 position removable comb on all rifle models
• Fully adjustable iron sights with Tritium front post and 2 dot Tritium rear aperture

IWI US's modernized Galil Ace is based upon the reliable mechanism of the original Galil assault rifle, and continuous improvements have resulted in an extremely reliable and highly accurate Galil Ace. Modernizations include weight reduction due to use of modern polymers, increased magazine compatibility, and a left-side charging handle (reciprocating) allowing for weak hand operation. The milled steel receiver is topped with a two-piece, full-length Picatinny rail, and it has a Picatinny style tri-rail forearm with built in, slide on/off rail covers with pressure switch access. The Galil Ace features fully adjustable iron sights with a Tritium front post and 2-dot Tritium rear aperture. The Galil Ace rifle has a side-folding, adjustable, telescoping buttstock with a removable two-position comb. This model is chambered for 7.62x39mm ammo and is compatible with AKM/AK-47 magazines. It has a 16" cold hammer-forged, CrMoV, chrome-lined barrel with a 1:9.45" twist.

The Tavor 7 is the next evolutionary step in the Tavor bullpup family. Based on requests from military and civilian customers alike, the Tavor 7 is IWI's introduction into the 7.62x51 bullpup rifle offering. The Tavor carries the usual reliability expected of all IWI products with some increased ergonomic features. This includes the ability to lock the charging handle without the use of the bolt catch. It also maintains the M4 type ambidextrous magazine release system and 45 degree ambidextrous safety. Chambered in 7.62x51, ODG in color and ship with one 20rnd magazine.

Must ship to a U.S. FFL dealer

The Tavor 7 is the next evolutionary step in the Tavor bullpup family. Based on requests from military and civilian customers alike, the Tavor 7 is IWI's introduction into the 7.62x51 bullpup rifle offering. The Tavor carries the usual reliability expected of all IWI products with some increased ergonomic features. This includes the ability to lock the charging handle without the use of the bolt catch. It also maintains the M4 type ambidextrous magazine release system and 45 degree ambidextrous safety. Chambered in 7.62x51 with a 20" Barrel, black in color and ships with one 20rnd magazine.

Must ship to a U.S. FFL dealer

Utilizing key features from the TAVOR TAR-21 bullpup rifles, the X95 is the next generation bullpup. An updated trigger pack features a 5-6lb pull, repositioning of the ambidextrous magazine release to the AR15 style, a forearm with picatinny rails at the 3, 6, and 9 o' clock positions with removable rail covers, relocation of the charging handle closer to the user's center mass, modular pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard and a smaller, lower profile bolt release button. Front and rear folding sights. Chambered in .300AAC (.300 Blackout) Comes with one 30RD magazine.

Utilizing key features from the TAVOR TAR-21 bullpup rifles, the X95 is the next generation bullpup. An updated trigger pack features a 5-6lb pull, repositioning of the ambidextrous magazine release to the AR15 style, a forearm with picatinny rails at the 3, 6, and 9 o' clock positions with removable rail covers, relocation of the charging handle closer to the user's center mass, modular pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard and a smaller, lower profile bolt release button. Optional 9mm and .300 blackout conversions will be available in the future. Front and rear folding sights. Comes with one 30RD magazine.