GRIP SCREWS
Shop by:
 More
|
Products
Sig Sauer Grip Screw, Slotted Head - P226 - Thin Head
|
Factory replacement grip plate screw (1) for P226. These have a thinner head than commonly found on P226 models. The shank is the same width and length. Thread pitch is also the same. The only difference is the head thickness. |
GRIP-SCREW-2-THIN
In stock
$2.95
Sig Sauer Grip Screw, Slotted Head - P226 - Standard Thick Head
|
Factory replacement grip plate screw (1) for P226. These are the most common screw head thickness for later P226 models. |
GRIP-SCREW-2
In stock
$2.95
Sig Sauer Grip Screw, Hex Head - 1911
|
Sig Sauer factory stainless replacement grip plate screw (1)PK for the 1911. Will not fit 1911 .22LR |
1911710
In stock
$1.99
Hex Head Bit - 1/8"
|
1/8" Hex Head Bit for installing and removing grip screws. Fits SIG P220, P230, P245 and P225 Hogue grip screws along with various other grip screws. Standard 1/4" drive. Made in Germany. |
WT71336
In stock
$1.99
Torx Plus Bit - IP20
|
IP20 Torx Plus for installing and removing Sig Sauer factory P229 Torx Plus grip screws. Standard 1/4" drive. Made in Germany. |
WT71620
In stock
$1.99
Hex Head Bit - 3/32"
|
3/32" hex Head Bit for installing and removing grip screws. Fits SIG P226, P228, P229, P238, P938 and P239 Hogue grip screws along with Wilson Combat 1911 and various other grip screws. Standard 1/4" drive. Made in Germany. |
WT71330
In stock
$1.99
Sig Sauer Grip Screw, Slotted Head - P232 STAINLESS
|
Factory replacement grip plate screw (1) for P232. Stainless steel finish. |
34232423
In stock
$6.95
Sig Sauer Grip Screw, Slotted Head - P228, P229 9mm NICKEL
|
Factory replacement nickel grip plate screw (1) for P228, P229 9mm. Nickel Finish. If you have an Elite model using the factory wood grips, you will need P239 grip screws, which are longer. |
34280334N
In stock
$2.95
Sig Sauer Grip Screw, Slotted Head - P228, P229 9mm
|
Factory replacement grip plate screw (1) for P228, P229 9mm. If you have an Elite model using the factory wood grips, you will need P239 grip screws, which are longer. |
GRIP-SCREW-5
In stock
$2.95
Sig Sauer Grip Screw, Slotted Head - P226 NICKEL
|
Factory replacement nickel grip plate screw (1) for P226. If you have an Elite model using the factory wood grips, you will need P239 grip screws, which are longer. |
1200334
In stock
$5.95
Sig Sauer Grip Screw, Slotted Head - P229 .40/.357, P224 9/.40/.357 - Stainless
|
Factory replacement stainless grip plate screw (1) for the P229 .40/.357 and P224 9/.40/.357. If you have an Elite model using the factory wood grips, you will need P239 grip screws, which are longer. |
1201256
In stock
$2.95
Hogue Grip Screw - P239- STAINLESS
|
Set of (2) Allen Head replacement grip screws for your Sig Sauer P239 pistol. Uses 3/32" Allen Wrench. |
31019
In stock
$4.49
Sig Sauer Grip Screw, Slotted Head - P220, P225, P230, P245
|
Factory blued replacement grip plate screw (1) for P220, P225, P230 and P245. These will also work with the P232 where a thinner head is required. |
GRIP-SCREW-9
In stock
$2.95
Hogue Grip Screw - P230 - BLUE
|
Set of (2) Allen Head replacement grip screws for your Sig Sauer P230 pistol. Uses 1/8" Allen Wrench. |
30009
In stock
$4.49
Sig Sauer Grip Screw, Slotted Head - P239
|
Factory replacement grip plate screw (1) for P239. These are also the correct screws for the P226 and P229 Elite models when using the factory wood grips. |
GRIP-SCREW-6
In stock
$2.95
Combo Bit Set - 3 Bits
|
Combination Bit set for many common grip grip screws. Includes 3/32" Hex Bit, 1/8" Hex Bit and IP20 Torx Plus Bit. Standard 1/4" drive. Made in Germany. |
WT1832ip20
In stock
$3.99
Hogue Grip Screw - P220/P225/P230/245- STAINLESS
|
Set of (4) Allen Head replacement grip screws for your Sig Sauer P220, P225, P230 or P245 pistols. Uses 1/8" Allen Wrench. |
20019
In stock
$8.49
Hogue Grip Screw - P239- BLUE
|
Set of (2) Allen Head replacement grip screws for your Sig Sauer P239 pistol. Uses 3/32" Allen Wrench. |
31009
In stock
$9.95
Sig Sauer Grip Screws
Top Gun Supply leads the way in providing parts for your firearms. If you need Sig Sauer Grip Screws, you’ll want to see our extensive selection. We stock the original factory replacements. Don’t be scrambling when you’ve lost a screw, keep extras on hand of these small parts! Match your gun model and its finish to the Sig grip screw products on our pages. You’ll see Sig Sauer grip screws with nickel, stainless steel, and blued finishes that complement your firearm. We even carry the hard-to-find parts. Also buy a P229 factory replacement grip plate screw for the .40S&W and .357SIG. Or purchase a nickel-plated grip screw for P220, P225, P230 and P245. Order single screws manufactured by Sig Sauer with slotted or torx heads. Genuine replacement screws help you keep your semi-automatic’s finished factory look.
If you’ve added an aftermarket Hogue rubber grip to your Sig, we can help with an extra set of screws made especially to match! The Hogue grip screws are manufactured to fit aftermarket Sig Sauer grips as well as the factory original grips. Use reliable Hogue grip screws in Allen head styles that are designed to fit the frames of a Sig models. Use an Allen wrench to replace grip screws for your Sig Sauer P220, P225, P230 or P245 pistols. You’ll also want a specific size of wrench to add on grip screws to the P226, P228 or P229. Achieve a seamless installation, with the right tools and screws, so grips go on without a scratch. If you’ve lost your screws when removing the factory or aftermarket gun grip, we have the replacements. Or get new grips on without a hitch so your gun is securely in hand sooner.