Shop by:
 More
|
Heckler and Koch
more...
Products
Heckler and Koch MR762 A4, 7.62 x 51mm MLOK
|
The latest update from HK-USA to the commercial variant of the legendary HK416, the MR762 A4 represent an enhanced example of “no compromise” HK
performance.
Its short-stroke gas piston operating system does not impart hot carbon fouling back into
the action, allowing the weapon to run longer, with less maintenance and with less wear
on internal components than direct-impingement ARs. Its adjustable gas regulator allows
the operator to tune the action specifically for suppressed or unsuppressed operation. Fully
ambidextrous controls, lighter weight and a slimmer profile make the new A4 easier to
operate, manipulate and employ.
For those who demand an AR with unmatched capability and uncompromising reliability
and durability, the MR A4s remain the top tier solution.
|
81000829
Out of stock
Heckler and Koch MR762A1 Rifle 7.62 x 51mm MLOK
|
The HK MR762 has been engineered based on the HK417 design, but in a semi-automatic configuration for civiliam use. The MR762 uses the HK Gas Piston System, consisting of a piston and operating rod which reduces wear and carbon fouling. This increases reliability over gas impingement systems. The MR762 comes standard with ambidextrous controls, free floating MLOK handguard, and a two stage trigger. |
81000586
Out of stock
Heckler and Koch SL8 .223 Rifle
|
Back by popular demand, the SL8 is an import-legal version of the G36 designed for precision shooting. It features a cold-hammer forged, chrome-lined barrel with a match crown. The free-floating bull barrel is manufactured with the famous HK cannon grade steel. The G36/SL8 short-stroke gas piston, later featured in the HK416, ensures smooth, clean, reliable operation. The SL8 also features a short Mil-Spec optics mount, match trigger, and an adjustable stock.
Caliber: .223 Remington Operating principle: Gas operated, short stroke piston Bolt system: Rotating bolt Magazine capacity: 10 rounds Length: 38.58 inches / 980 mm Width: 2.36 inches / 60 mm Height: 9.84 inches / 250 mm Barrel length: 20.80 inches / 528 mm Weight: (without magazine) 8.60 lb (3900 grams) Magazine weight empty: 12.47oz/70 g Trigger pull: 4.5 pounds / 20 N ( approximate) Return travel: .229 inches / 5.82 mm Barrel profile: 6 grooves, right-hand twist, 1:7 twist
|
81000751
Out of stock
Heckler and Koch USC .45ACP Rifle
|
Derived from the HK UMP submachine gun, the USC is a civilian utility carbine that uses the classic hard-hitting .45 ACP cartridge. Matched with a simple and ultra-reliable blowback operating system, the HK USC is a radical departure from traditional firearms designs.
Extensive use of the same durable reinforced polymers found on HK‘s line of military and police arms ensures lightweight and durability. And the highest grade of weapons steel is used where it matters —in the cold hammer forged target barrel and the solidly constructed bolt mechanism.
User ergonomics are not sacrificed. The skeletonized buttstock is capped with a comfortable rubber cheek rest and recoil pad. The web of the pistol grip is open for a comfortable handhold for a wide range of shooting applications. Hard points located on the top and sides of the receiver and handguard make attachment of optional Picatinny rails easy —allowing almost any kind of accessory to be mounted.
HK USC are covered by HK‘s lifetime warranty.
LIMITED PRODUCTION FOR 2018
USC CARBINE FEATURES • Tough, lightweight, corrosion proof polymer construction
• Molded-in hard points for mounting accessories
• Optional accessory Picatinny rails available for easy mounting of optical sights, lights, and aiming devices
• Rear sight is adjustable for windage and elevation
• Ambidextrous safety/selector lever
• Oversized trigger guard for easy operation while wearing gloves
• Sixteen inch cold-hammer forged target barrel
• Polymer 10 round magazine
• Lifetime warranty
|
81000092
Out of stock
HK 3x14mm Roll Pin USP and P2000
|
Heckler & Koch 3X14MM Roll Pin for USP, USP Compact, P2000 and P2000sk models. This pin is used for three different applications on HK pistols. |
980838
Out of stock
HK Barrel O-Ring - .45ACP
|
Heckler & Koch Barrel O-Ring for all H&K .45ACP caliber pistols (HK45, HK45C, MK23, USPT). Factory replacement part manufactured by HK in Germany. |
50986429
Out of stock
HK Barrel O-Ring - USP Tactical 9mm, .40S&W - Green
|
Heckler & Koch Barrel O-Ring for H&K 9mm and .40S&W caliber pistols with threaded barrels. Factory replacement part manufactured by HK in Germany. Green. |
987141
Out of stock
HK Barrel Thread Cap - M13.5 X 1LH
|
Heckler & Koch factory 9mm barrel thread cap. Will fit all HK 9mm threaded barrels. M13.5 X 1 left handed threads. Manufactured from steel and made in Germany. |
207330
Out of stock
HK Buffer Spring Retainer All Full Size USP
|
HK Buffer Spring Retainer for full size USP 9mm, .40S&W and .45ACP. |
214208
Out of stock
HK Buffer Spring USP 9mm, .40SW
|
Heckler & Koch recoil buffer spring for full size USP 9mm and .40S&W models. Inner spring of the recoil spring assembly. |
214207
Out of stock
HK Catch - USPF/USPC/HK45/HK45C LEM
|
HK factory made catch for USP Compact LEM and HK45 models. New style catch to convert older USP models to the newer style catch as well as to convert to the LEM variant. Fits all LEM models for USP Full Size, Expert, Elite, USPC, HK45, and HK45C. |
50219442
Out of stock
HK Control Lever Left, Full Size USP All Calibers V1,V5,V9
|
HK Control Lever for the left side of full size USP 9mm, .40S&W, and .45ACP for Variants 1,5 and 9. |
214184
Out of stock
HK Control Lever Left, USP Compact All Calibers V1,V5,V9
|
HK Control Lever for the left side of USP Compacts 9mm, .40S&W, .357SIG and .45ACP for Variants 1,5 and 9. |
215818
Out of stock
HK Control Lever Left, USP Compact All Calibers V3
|
HK Control Lever for the left side of USP Compacts 9mm, .40S&W, .357SIG and .45ACP for Variant 3 models. |
215858
Out of stock
HK Control Lever Right, Full Size USP All Calibers V2,V6,V10
|
HK Control Lever for the right side, full size USP 9mm, .40S&W, .357SIG and .45ACP models, for Variants 2,6 and 10. |
214309
Out of stock
HK Control Safety Lever, Full Size USP All Calibers V3
|
HK Control Lever Safety for all full size USP 9mm, .40S&W, .357SIG and .45ACP for Variant 3 models. |
214352
Out of stock
HK Control Safety Lever, Full Size USP All Calibers V4
|
HK Control Lever Safety for all full size USP 9mm, .40S&W, .357SIG and .45ACP for Variant 4 models. |
214253
Out of stock
HK Detent Plate USP and USP Compact V3, V4
|
HK Detent Plate For All HK USP, HK45 & HK45C Pistols:
|
214254
Out of stock