IWI - Manufacturers - Top Gun Supply

The first M4 Variant rifle from IWI US, this 16 Tactical Rifle includes a 15 Free Float Handguard, a B5 Systems Stock, and Grip, and includes one 30 round Magpul PMAG. Proudly manufactured and assembled at the IWI US facility in Middletown, Pennsylvania.

The IWI US CARMEL rifle is a semiautomatic, short stroke, gas piston rifle. Made from superior steel, aviation grade aluminum and high strength impact modified polymer for outstanding performance in all environmental conditions. The rifle has a locking, rotating bolt system ensuring maximum safety for the user. IWI US CARMEL is fully ambidextrous and can be easily customized with MLOK rails at the 3, 6 and 9 position to allow compatibility with various accessories.

The new Galil ACE GEN II is a continuation of the Galil ACE, which is based on the reliable mechanics of the original Galil rifle first developed by IMI in the late 1960’s. Drawing inspiration from the legendary Russian AK-47 and the Finnish Valmet RK 62, the IWI Galil family has been continuously improved over the last 50 years, resulting in today’s extremely reliable and highly accurate Galil ACE GEN II.

Improvements made since the original Galil was first developed and Galil ACE include:

• Charging handle (reciprocating) on the left side of the milled steel receiver allowing for weak hand operation.
• Weight reduction with the use of modern polymers.
• AKM/AK-47 magazine compatibility. (Note that the Galil ACE GEN II rifle is assembled in the US from imported and US parts under 18 U.S.C § 922(r). You should only use magazines made in the USA in your Galil ACE GEN II rifle. Use of an imported magazine may put you in violation of 18 U.S.C § 922(r).)
• Full length 2-piece Picatinny style top rail. (GEN II)
• Free Float M-LOK rail forearm. (GEN II)
• Updated Trigger profile. (GEN II)
• Updated and shorted safety profile and throw. (GEN II)
• Side folding adjustable telescoping buttstock with M4 stock compatibility. Rifles ship with Magpul CTR and riser.

Must ship to a U.S. FFL dealer

The new Galil ACE GEN II is a continuation of the Galil ACE, which is based on the reliable mechanics of the original Galil rifle first developed by IMI in the late 1960’s. Drawing inspiration from the legendary Russian AK-47 and the Finnish Valmet RK 62, the IWI Galil family has been continuously improved over the last 50 years, resulting in today’s extremely reliable and highly accurate Galil ACE GEN II.

Improvements made since the original Galil was first developed and Galil ACE include:

• Charging handle (reciprocating) on the left side of the milled steel receiver allowing for weak hand operation.
• Weight reduction with the use of modern polymers.
• AKM/AK-47 magazine compatibility. (Note that the Galil ACE GEN II rifle is assembled in the US from imported and US parts under 18 U.S.C § 922(r). You should only use magazines made in the USA in your Galil ACE GEN II rifle. Use of an imported magazine may put you in violation of 18 U.S.C § 922(r).)
• Full length 2-piece Picatinny style top rail. (GEN II)
• Free Float M-LOK rail forearm. (GEN II)
• Updated Trigger profile. (GEN II)
• Updated and shorted safety profile and throw. (GEN II)
• Side folding adjustable telescoping buttstock with M4 stock compatibility. Rifles ship with Magpul CTR and riser.

Must ship to a U.S. FFL dealer

The modernized Galil Ace is based upon the reliable mechanism of the original Galil assault rifle, and continuous improvements have resulted in an extremely reliable and highly accurate Galil Ace. Modernizations include weight reduction due to use of modern polymers, increased magazine compatibility, and a left-side charging handle (reciprocating) allowing for weak hand operation. The milled steel receiver is topped with a two-piece, full-length Picatinny rail, and it has a Picatinny style tri-rail forearm with built in, slide on/off rail covers with pressure switch access. The Galil Ace features fully adjustable iron sights with a Tritium front post and 2-dot Tritium rear aperture. Galil Ace SB models feature a side-folding stabilizing brace (produced for IWI US by SB Tactical). With the unique side-folding feature, the Galil Ace SB can be fired with or without the brace extended depending on the shooters need. With the brace folded, storage space required in your safe or range/rifle bag is minimized. This model is chambered for 5.56 NATO (5.56x45mm) ammo and is compatible with NATO STANAG magazines. It has an 8.3" cold hammer-forged, CrMoV, chrome-lined barrel with a 1:7" twist. OAL is 19.5" folded and 27.5" with the brace extended.

First introduced in the US in 1990, the Jericho 941 has enjoyed wide acceptance by American shooters over the last 25 years. Based on the highly regarded CZ-75 short recoil system, Jericho pistols combine proven design and function with IWI’s exceptionally high standards for reliable performance, accuracy and quality construction.

The Jericho features a frame mounted safety enabling “condition one” cocked and locked carry with single action function or hammer down double action function. Additional features include an integral Picatinny style rail for mounting accessories, adjustable dovetailed sights, and a firing pin block. Barrels are cold hammer forged of the finest Mil-Spec CrMoV steel.

IWI MASADA 9mm polymer framed striker-fired pistol was developed in order to provide an advanced solution to the modern battlefield requirements. Much more than just another striker-fired pistol, the MASADA features a low profile barrel for reduced perceived recoil. Fully ambidextrous controls and enhanced ergonomics which provide a natural and instinctive pointing grip angle. Three interchangeable wrap around back-straps coupled with the deep beavertail enabling the MASADA pistol to fit a wide variety of hand sizes.

Masada’s frame is made of high strength, impact resistant fiberglass reinforced polymers. Like all IWI firearms, it is built to withstand and endure all types of military use and abuse in extremely harsh environmental conditions. MASADA comes with a polygonal rifled, cold hammer forged barrel with 1:10 RH twist rate. MASADA magazines offer a generous capacity of 17+1.

The Tavor 7 is the next evolutionary step in the Tavor bullpup family. Based on requests from military and civilian customers alike, the Tavor 7 is IWI's introduction into the 7.62x51 bullpup rifle offering. The Tavor carries the usual reliability expected of all IWI products with some increased ergonomic features. This includes the ability to lock the charging handle without the use of the bolt catch. It also maintains the M4 type ambidextrous magazine release system and 45 degree ambidextrous safety. Chambered in 7.62x51, ODG in color and ship with one 20rnd magazine.

Must ship to a U.S. FFL dealer

The Tavor 7 is the next evolutionary step in the Tavor bullpup family. Based on requests from military and civilian customers alike, the Tavor 7 is IWI's introduction into the 7.62x51 bullpup rifle offering. The Tavor carries the usual reliability expected of all IWI products with some increased ergonomic features. This includes the ability to lock the charging handle without the use of the bolt catch. It also maintains the M4 type ambidextrous magazine release system and 45 degree ambidextrous safety. Chambered in 7.62x51 with a 20" Barrel, black in color and ships with one 20rnd magazine.

Must ship to a U.S. FFL dealer

Utilizing key features from the TAVOR TAR-21 bullpup rifles, the X95 is the next generation bullpup. An updated trigger pack features a 5-6lb pull, repositioning of the ambidextrous magazine release to the AR15 style, a forearm with picatinny rails at the 3, 6, and 9 o' clock positions with removable rail covers, relocation of the charging handle closer to the user's center mass, modular pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard and a smaller, lower profile bolt release button. Front and rear folding sights. Chambered in .300AAC (.300 Blackout) Comes with one 30RD magazine.

Tavor X95 is the next generation bullpup from IWI US, Inc. Upgrades and enhancements from the original TAVOR SAR include a new fire control pack with a 5-6 lb. trigger pull, repositioning of the ambidextrous mag release to an AR-15 location, a forearm with Picatinny rails at the 3, 6, and 9 o'clock positions with removable rail covers, relocation of the charging handle closer to your center mass, a modular Tavor style pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard, and a smaller, lower profile bolt release button. Ships with one 10rd magazine.

The Tavor® X95™ is the next generation bullpup from IWI US, Inc. Upgrades and enhancements from the original TAVOR® SAR include a new fire control pack with a 5-6 lb. trigger pull, repositioning of the ambidextrous mag release to an AR-15 location, a forearm with Picatinny rails at the 3, 6, and 9 o’clock positions with removable rail covers, relocation of the charging handle closer to your center mass, a modular Tavor style pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard and a smaller, lower profile bolt release button. 16.5" cold hammer forged chrome lined barrel, gas piston, folding front sight (blade) with Tritium insert and rear sight (aperture). This rifle is chambered in .300AAC and ships with one 30RND magazine.

This Tavor X95 chambered in 9mm is the next generation bullpup from IWI US, Inc. Upgrades and enhancements from the original TAVOR SAR include a new fire control pack with a 5-6 lb. trigger pull, repositioning of the ambidextrous mag release to an AR-15 location, a forearm with Picatinny rails at the 3, 6, and 9 o'clock positions with removable rail covers, relocation of the charging handle closer to your center mass, a modular Tavor style pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard, and a smaller, lower profile bolt release button.

Tavor X95 is the next generation bullpup from IWI US, Inc. Upgrades and enhancements from the original TAVOR SAR include a fire control pack with a 5-6 lb. trigger pull, repositioned ambidextrous mag release, a forearm with Picatinny rails with removable rail covers, modular Tavor-style pistol grip, and a smaller bolt release button with a lower profile. Gas piston operated, the X95 has adjustable BUIS comprised of a folding front blade sight with Tritium insert and an aperture rear sight. It has an 18.5" chrome-lined, cold hammer-forged CrMoV barrel and a bayonet lug. This model has a black stock.