The GEN M2 PMAG™ is contructed of a durable, lightweight polymer, designed for use with 5.56 NATO and .223 Remington ammunition in M-16, AR-15 rifles. The new MOE Magazine is identical to the 211 non window model PMAG, however does not come with a dustcover.

Please check restricted shipping zones before ordering.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.

Please check restricted shipping zones before ordering.

The 7.62x51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles in the smallest possible magazine size.

Ideal for hunting applications with the addition of our Minus Five Round Limiter, for use in states where overall capacity is limited, or with precision platforms using longer than SAAMI-spec match ammunition up to 2.830" OAL. Perfect for use with a bipod or when shooting off of a pack.

Made in U.S.A.

FEATURES

• Optimized for use with 7.62x51 M118LR or other .308 Winchester ammunition with a max OAL of 2.830"
• Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
• True 10-round capacity that does not require limiters, pins, rivets, etc.
• Next-generation impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Anti-tilt, self-lubricating follower for increased reliability
• High-quality stainless steel spring for corrosion resistance
• Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
• Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.

Please check restricted shipping zones before ordering.

Made in the U.S.A, the PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO/223 Rem. Similar to the MOE PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning. The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Medium Coyote Tan Finish.

Please check restricted shipping zones before ordering.

The next generation .308 PMAG features numerous improvements over the original MAG243 .308 PMAG. The Gen M3 PMAG features a self lubricating, anti-tilt follower, high quality stainless steel magazine spring, paint pen dot matrix for easy numbering, flared floorplate and aggressive front and rear texture for positive magazine handling. For SR25/M110 pattern rifles.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.

Please check restricted shipping zones before ordering.

The Magpul Maglink allows the user to attach two magazines together for quicker, more efficient reloads. Features a two-piece bolt on design that securely holds two 30RD PMAGS on the weapon. Not compatible with first generation PMAG 30, PMAG 20, EMAG, PMAG30G, or PMAG 20LR.

Made in the USA, the next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Similar to the MOE PMAG, the GEN M3 Window features a long-life USGl-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning. In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification.The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Medium Coyote Tan Finish.

Please check restricted shipping zones before ordering.

The GEN M2 PMAG™ is contructed of a durable, lightweight polymer, designed for use with 5.56 NATO and .223 Remington ammunition in M-16, AR-15 rifles. The new MOE Magazine is identical to the 210 window model PMAG, however does not come with a dustcover.

Please check restricted shipping zones before ordering.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover and new slimmer, flared floorplate that aids in extraction while providing improved drop protection. The Gen M3 PMAG is designed to work with both Colt and non Colt-spec rifles such as the HK MR556 and FN SCAR which have tighter mag well tolerances. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

Made in the USA, the PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles. In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 BLK rifle. Its distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B incorporates all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification.

The next generation .308 PMAG features numerous improvements over the original .308 PMAG. The Gen M3 PMAG features a self lubricating, anti-tilt follower, high quality stainless steel magazine spring, visual window for easy round count inspection, paint pen dot matrix for numbering, flared floorplate and aggressive front and rear texture for positive magazine handling. For SR25/M110 pattern rifles.

Please check restricted shipping zones before ordering.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover and new slimmer, flared floorplate that aids in extraction while providing improved drop protection. The Gen M3 PMAG is designed to work with both Colt and non Colt-spec rifles such as the HK MR556 and FN SCAR which have tighter mag well tolerances. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

Please check restricted shipping zones before ordering.

Supplemental dust covers for the Gen 2 PMAG models. Designed to reduce debris intrusion, and cartridge damage during transport or storage. 3 Pack.

The PMAG 20 AR 300 B GEN M3 is a purpose-built magazine for rifles chambered in .300 Blackout (300 BLK). Similar in every way to our PMAG 30 AR 300 B, the PMAG 20 is more compact for increased maneuverability and creates a more concealable package for use in small format firearms. The PMAG 20 AR 300 B's distinct ribbed design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Made in the USA.

Made in the USA, the Magpul PMAG D-50 is a rugged, lightweight, and reliable 50-round polymer drum magazine designed for 7.62x51 NATO/.308 Winchester ammunition for SR25/M110 pattern rifles. The Magpul PMAG D-50 shares its DNA with the legendary Magpul PMAG GEN M3, which includes next-generation impact and crush-resistant polymer construction and the ability to seat fully loaded on a closed bolt. Robust stainless-steel internals withstand corrosion and long-term storage while loaded with no loss of function, spring fatigue, or reliability concerns. A slip-on semi-rigid dust cover prevents grit and debris intrusion during storage and transport. An anti-glare translucent window on the rear of the drum makes for quick positive visual indication of remaining ammunition.

Please check restricted shipping zones before ordering.

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington polymer drum magazine for AR15/M4 compatible weapons. With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload. The unique drum configuration keeps the height of the magazine manageable as well as allowing for prone firing and easier storage. Features an easy-to-use loading lever, paint pen dot matrix for easy marking, and a rear window for instant capacity indication. Compatible with a wide range of NATO firearms such as the M4, M16, SCAR(TM) MK16/16S, HK(R)416, MR556, M27 IAR, IWI Tavor, and others.

Please check restricted shipping zones before ordering.