SUPPRESSORS
Shop by:
 More
|
Products
Griffin Armament Revolution 9, Modular 36 Cal
|
The original Revolution® 9 & 45 suppressors were the first pistol silencers developed and brought to market with a modular length feature set, and that Griffin innovation inspired all the other modular length pistol suppressors in the US marketplace. The (MOD 4) Revolution® 9 suppressor represents a total redesign around of package of end user feature interaction enhancements, making the suppressor more secure and easier to mount, as well as fast and easy to configure in length, and easy to disassemble, at vastly increased maintenance intervals. The forward extension allows tool-less reconfiguration, and the O-ring biased extension and front cap prevent inadvertent loosening of the extension or cap. The booster housing (mount accessory interface socket) is permanently installed so tightening and loosening the suppressor does not result in loosening of the booster housing. The housing accepts pistons, fixed barrel mounts and spacers, our Griffin developed industry first integrated 3 lug mount, as well as Plan A mounts.
Another major improvement introduced in the MOD 4 generation is the incorporation of Griffin’s patented CARBON-GARD™ baffle technology. This concept, originally debuted in the Checkmate HD suppressor, has applications for pistol suppressors to make cleaning and maintenance of the suppressor easier even after very high round counts. High temp silicon o-rings are positioned at each baffle interface as well as the end cap, blast chamber, and extension tubes to fully seal gases and carbon within the baffle stack. This gas seal prevents lead and carbon fouling from building up between the tube body and the baffle stack, eliminating instances of the baffle core being carbon locked inside of the tube body, a condition that is very annoying for the end user. Revolution® MOD 4 Suppressors ship with an included EZ-LOK™ piston providing a more secure, and rapid mounting system than direct thread. EZ-LOK™ barrel end adapters are available for purchase separately. Rating
|
GAREV9M4-W
Out of stock
Huxwrx Flow 22Ti Suppressor FDE
|
The FLOW 22 Ti is the lightest and quietest Flow-Through suppressor to come from HUXWRX Safety Co. Completely 3D-printed in Grade 5 Titanium, the FLOW 22 Ti is lightweight, versatile, and extremely durable. Built with the latest advancements on our patented and proven Flow-Through technology, it effectively delivers toxic fume mitigation, improved sound performance, and increased accuracy with excellent repeatability. This suppressor comes direct thread ready in 1/2x28, offers a cleaner shooting experience, and requires no general modifications to the weapon system. The FLOW 22 Ti is full-auto rated and cross platform compatible for 17 HMR, 22 LR, 22 Magnum, and 5.7 with no barrel length restrictions. This suppressor is ideal for competition shooters, hunting enthusiasts, and individuals seeking a top-tier rimfire build. |
3166
Out of stock
HUXWRX Flow 9K Ti Suppressor - Black
|
The FLOW 9k Ti is lighter, quieter, and more efficient than its predecessor, the RAD 9. Featuring hybridized Flow-Through technology, this superior 9mm suppressor is constructed entirely of Grade 5 titanium and has an enhanced GeoFlash Cap with extended lugs for hassle-free installation and removal. As HUXWRX's first fully 3D-printed pistol suppressor, the FLOW 9k Ti boasts exceptional durability and reliability and is optimal on PCC platforms. Its design also includes stiction mounting and hub adapter capability for versatile compatibility. The FLOW 9kTi is full-auto rated with no barrel restrictions. No modifications to the platform or gas system are required to install or operate this suppressor.
Rating
|
2949
Out of stock
HUXWRX Ventum 5.56 Suppressor - Black
|
The latest in the VENTUM series—the VENTUM 556 brings HUB compatible Flow-Through® technology to dedicated 5.56 weapon systems. With a removeable 3D-printed Grade 5 Titanium core and 17-4 stainless steel suppressor housing, the VENTUM 556 is easily serviceable and provides all the benefits of true Flow-Through® technology including toxic fume mitigation, improved sound performance, and excellent repeatability.
With the Flow-Through® design no significant modifications to the platform or gas system are required. Flow-Through® technology cycles and redirects expanding gases in a helical pattern away from the bore-line, through the front of the suppressor, and away from the shooter’s face, eyes, and lungs.
Full-auto rated and direct thread ready, this multi-caliber suppressor is versatile with a detachable GeoFlash™ cap and comes ready to accept universal HUB and Stiction mounting systems. The universal HUB mounting system will allow adapters such as Xeno, KeyMo, and ASR, plus other approved mounting systems. It is cross-platform functional and ideal for bolt and lever action, centerfire, submachine gun, bullpup, and AK platforms.
Product Specs
|
2904
Out of stock
Jk Armament 105 CCX, 9mm
|
So lightweight it doesn’t need a booster! Transitions from range use to concealed carry use The only ultra-compact, 9mm silencer that’s durable enough to train with every day Easily converts to a great rimfire suppressor by swapping the End Cap.
The JK 105 CCX 9MM is the first and only 9mm suppressor capable of going from the shooting range to your concealed carry rig! Its so compact and lightweight that it runs on 9mm pistols without a booster! The CCX is considered a micro, ultralight pistol suppressor and is part of our special use line. Half the size and weight of the competition, our special use suppressors perform best when run wet.
Ratings w/ no minimum barrel length
Rating minimum barrel length 16''
|
JK-105CCX9
Out of stock
Otter Creek Titanium 22, .22LR - BLK
|
Titanium 22 is a simple, easy to use, easy to clean, light weight, small, quiet 22 suppressor. The mount threads longer to accommodate some of the longer threaded rifle barrels so you can use it without having to use a spacer or shim. The wrench flats in the front and rear of the suppressor can be used with any adjustable wrench from your local hardware store. Just a straight forward product that you can be happy you bought with your hard earned money.
|
TI22
Out of stock
PTR Vent 2 9mm Luger, 1/2"-28
|
The ultra-high performance patented VENT TM Suppressor utilizes the next generation of suppressor technology. The design features sintered titanium and patented Purposely Induced Porosity (PIP), which enables it to outperform nearly every competitor in the market with its unique combination of lightweight, heat dissipation, sound suppression, and back pressure reduction. These suppressors employ a 3D-printed, monolithic, body-to-core structure, increasing their structural integrity and thermal resilience. This revolutionary design eliminates failure points often associated with traditional suppressors. Through the use of Purposely Induced Porosity (PIP), PTRs engineers are able to finely tune the strength, density, heat capacity, and thermal conductivity of the VENT suppressors in ways that are beyond the capabilities of traditional manufacturing. This industry leading technology creates a way to control the rapid expansion of gas that traditional baffle and flow through suppressors are unable to achieve, making the line of VENTTM Suppressors truly cutting-edge and superior in the marketplace.
Rating
|
V2-0090101
Out of stock
PTR Vent 3 5.56, 1/2"-28
|
The ultra-high performance patented VENT TM Suppressor utilizes the next generation of suppressor technology. The design features sintered titanium and patented Purposely Induced Porosity (PIP), which enables it to outperform nearly every competitor in the market with its unique combination of lightweight, heat dissipation, sound suppression, and back pressure reduction. These suppressors employ a 3D-printed, monolithic, body-to-core structure, increasing their structural integrity and thermal resilience. This revolutionary design eliminates failure points often associated with traditional suppressors. Through the use of Purposely Induced Porosity (PIP), PTRs engineers are able to finely tune the strength, density, heat capacity, and thermal conductivity of the VENT suppressors in ways that are beyond the capabilities of traditional manufacturing. This industry leading technology creates a way to control the rapid expansion of gas that traditional baffle and flow through suppressors are unable to achieve, making the line of VENTTM Suppressors truly cutting-edge and superior in the marketplace.
Rating
|
V3-5560101
Out of stock
Q Erector 9 Silencer, 9mm, 1/2"-28 tpi
|
The Erector is made up of clear hard-coat anodized aircraft grade aluminum baffles, a mount and front cap, complimented by a heat treated stainless blast baffle. Notice, we didn't mention outer tube. No outer tube means more internal volume, making this silencer so quiet it's in a class of it's own. This silencer comes with unique tools, not a wrench flat. A wrench flat will cause damage to your silencer, wrench flats are what imposters use. Configure this silencer with one battle, or all ten to fit the needs of your host firearm and ammunition. The choice is ours... Choose wisely!!! |
SIL-E-9
Out of stock
Q Trash Panda Silencer, 7.62
|
The trash PANDA by Q is the Quickie(TM) Fast-Attach version of our half NELSON(TM) silencer. Designed with practical shooters in mind who wish to suppress multiple platforms, this silencer is short, lightweight, and hearing safe. 100% titanium construction with a Bead Blasted Finish, fully rotary welded with no outer tube, and features standard size wrench flats on the front and back for easily install and removal. |
SIL-TP-QUICKIE-762-B
Out of stock
Radical Defense LS3 Rifle Suppressor 30 Cal, 5/8x24
|
3D printed monolithic design using a nickel based Super Alloy Haynes 282, the LS-3 is one of the most durable suppressors on the market to date. The LS-3 is capable of sustained full-automatic fire while providing operators with sound, thermal, and flash mitigation. The LS-3 utilizes a forward venting monolithic design controlling cyclic rate while the assist ports reduce back pressure. The LS-3 is protected by a high-temp Cerakote coating, providing protection and a higher level of concealability.
Rating
|
LS3
Out of stock
Radical Defense LS5 Rifle Suppressor 5.56, 1/2x28
|
3D printed monolithic design using a nickel based Super Alloy Haynes 282, the LS-5 is one of the most durable suppressors on the market to date. The LS-5 is capable of sustained full-automatic fire while providing operators with sound, thermal, and flash mitigation. The LS-3 utilizes a forward venting monolithic design controlling cyclic rate while the assist ports reduce back pressure. The LS-5 is protected by a high-temp Cerakote coating, providing protection and a higher level of concealability.
Rating
|
LS5
Out of stock
Rugged Obsidian 9 - BLK
|
The Obsidian9 is optimized for 9mm for additional suppression while staying light and compact. Our ADAPT™ Module gives you 2 lengths in one suppressor, for maximum suppression or weight/length savings. With a diameter of 1.37″ the Obsidian9 is compatible with pistol suppressor sights, making it perfect for pistols or sub-guns. Diameter: 1.37″ Baffles: 17-4 Stainless Steel Belt Fed Rated for Pistol Calibers up-to 9mm |
OBS0009
Out of stock
Rugged Obsidian 9 - FDE
|
The Obsidian9 is optimized for 9mm for additional suppression while staying light and compact. Our ADAPT™ Module gives you 2 lengths in one suppressor, for maximum suppression or weight/length savings. With a diameter of 1.37″ the Obsidian9 is compatible with pistol suppressor sights, making it perfect for pistols or sub-guns. Diameter: 1.37″ Baffles: 17-4 Stainless Steel Belt Fed Rated for Pistol Calibers up-to 9mm |
OBSFDE9
Out of stock
Rugged Oculus 22 - BLK
|
ADAPT Modular Technology allows the Oculus 22 to have two configurations, so that you can have a shorter and lighter suppressor in seconds compared to months. The Oculus 22 features class leading suppression and no first round pop in the standard configuration. Oculus 22 is machined from 17-4 Stainless steel barstock. This gives you the ability to use practically any cleaning method with each and every part of the Oculus 22. Oculus 22 baffles are machined from 17-4 Stainless steel barstock, with indexing tabs for repeatable return to zero after user servicing. The Oculus 22 uses slotted baffles that create a gas seal to prevent carbon and gas build up between the tube and baffles for ease of disassembly. The engraving is strategically placed on the thickest cross section of the 17-4 stainless steel mount for fast and easy replacement should the suppressor become damaged beyond repair, it also serves to make the Oculus 22 infinitely upgradable in the future. Ratings:
|
OCU22
Out of stock
Rugged Radiant 762
|
The Radiant762 is the pinnacle of lightweight modularity. Combining the use of Stellite baffles in the main body and grade 5 Titanium baffles in the module means not only is this can lightweight but it also has the durability to be pushed to the limits. Purpose built for lightweight durability, the Radiant762 is full-auto rated surpassing the US SOCOM firing schedule and is rated for magnum calibers up to 300 RUM. The Radiant762 provides two configurations in one tax stamp. In its short configuration the Radiant762 is perfect for situations in which length and maneuverability take priority. When sound suppression takes priority simply attach the ADAPT Module for additional decibel reduction. Don't compromise when you can ADAPT. |
RAD01762
Out of stock
Sig Sauer MODX-9 Suppressor - 9mm
|
Sig's MODX-9 features a user configurable modular baffle design. It has titanium construction with an unique exterior design which doubles as a wrench flats. Included are 1/2"-28 & M13.5x1LH threads, and fixed barrel spacer for use with carbines. The MODX-9 also features 21 points of impact adjustment.
|
MODX-9
Out of stock
Sig Sauer SRD22X Titanium Suppressor - .22LR
|
The Sig Sauer SRD22X .22LR Suppressor can be used on both pistols and rifles and features a Grade 9 Titanium outer tube with stainless steel baffles. An inner stainless steel tube enables easy disassembly and cleaning. Due to the durability of its materials, the SRD22X can be used with .22LR pistols or rifles, and pistols or rifles chambered in .17HMR/.17 Mach II and .22 Magnum. The SRD22X comes with a 1/2”x 28tpi and an available M9x.75 rear mount. Specifications are subject to change. -Length: 5.8 in (147 mm) -Weight: 5.1 oz (144 g) -Threads: 1/2-28 tpi |
SRD22X
Out of stock