SUPPRESSORS
Shop by:
- Manufacturer -> SilencerCo
Products
SilencerCo Sparrow 22 Suppressor
The Sparrow 22 was designed with simplicity, durability, and user serviceability as its core objectives. Patented Multi-Part Containment (MPC) technology facilitates ease of disassembly and reassembly an essential function of rimfire suppressor. The internal MPC construction uses two half tubes that pull away from a monolithic core, which ensures that the Sparrow 22 will remain easy to clean after extended periods of use with notoriously dirty rimfire ammunition. The Sparrow 22 is rated for .22 LR, .22 Mag, .17 HMR, .17 WSM and FN 5.7 × 28 calibers. It’s full-auto rated with 22LR. It’s compatible with Delta Adapters and ships with a Delta Threaded Rifle Spacer in 1/2 x 28. |
SU75
In stock
$349.00
SilencerCo Hybrid 46 DTM Suppressor
SilencerCo Hybrid 46 DTM is the same familiar face as the Hybrid 46 with a lighter mount. Featuring a titanium tube and fully-welded, 17-4 stainless steel and Inconel baffle stack, the Hybrid 46 DTM is tough enough to tame nearly every round that’ll fit through its .46 caliber bore. From pistols up to .45 caliber, lever guns up to .45-70 Gov’t, rifles in 5.56 on up to 338 Lapua Magnum energy levels firing bullets up to .46 caliber, this do-it-all silencer has you covered! Full-auto and magnum-rated, the Hybrid 46 DTM uses a titanium tube to keep its weight down to just 13.7 ounces. The Hybrid 46 DTM can easily swap between all of your host weapons by using ASR mounts, a pistol booster, 3-Lug adapters, direct thread adapters, and more. As with its modular siblings, the Omega 36M and Hybrid 46M, the Hybrid 46 is manufactured in Utah and protected by SilencerCo’s lifetime warranty. TECHNICAL SPECIFICATIONS:
|
SU5401
Out of stock
SilencerCo Hybrid 46 Suppressor
The Hybrid is the silencer for any platform. Compatible with pistol calibers from 9mm to .45ACP, rifle calibers from 5.56mm to .4570 GOV and many in between like .458 SOCOM, the Hybrid is both full auto and magnum-rated and can be used on pistols, rifles and submachine guns. Boasting low-120 dBs on .300 BLK and remaining hearing safe with .4570 GOV, the Hybrid offers an unparalleled pairing of versatility and performance a combination youve come to expect from SilencerCo products. The Hybrid is rated down to 16" barrels for .4570 GOV and .458 SOCOM and down to 18" barrels for all magnum calibers up to .338 Lapua Magnum. With a slew of compatible accessories available, you can turn the Hybrid into the perfect silencer for any demand. |
SU2271
Out of stock
SilencerCo Hybrid 46M Suppressor
The Hybrid 46M is a light, compact, modular centerfire rifle suppressor, with the versatility to use on magnum rifles, pistols, and subguns. The Hybrid 46M is rated for all centerfire pistol and rifle calibers including 45 Auto, 10MM, .450 Bushmaster, .458 SOCOM, .45-70, .338 LM and up to .460 Weatherby Magnum. This suppressor ships with Charlie ASR Mount, (2) Charlie Basic Tools, Charlie Multitool, and manual. Muzzle Average: 128.90 dB and up. |
SU5107
Out of stock
SilencerCo Omega 300 Suppressor - Black
The best of all worlds, the Omega is the lightest, shortest, quietest, full auto rated titanium .300 caliber (7.62mm) centerfire rifle silencer on the market. Its also the best selling rifle silencer in history. Comes complete with direct thread and fast attach mounts as well as a removable Anchor Brake to reduce recoil, which can be replaced with a flat front cap. |
SU2281
Out of stock
SilencerCo Omega 36M Suppressor - Multi Caliber
SilencerCo's first modular centerfire rifle silencer the Omega 36M. The front baffle section can be removed to minimize weight and length or retained for maximum sound suppression. Installation of the front baffle section only needs to be hand tightened. Tool slots ensure easy removal with existing SilencerCo Charlie tools (shipped with the Omega 36M). Compatible with Charlie accessories, Direct Thread, ASR muzzle devices, Silencerco Pistons and the 9mm 3-Lug Mount. Functional on pistol, rifle and subgun platforms. The Omega 36M is rated down to 10" barrels for 223 Remington/5.56mm NATO, 16" barrels for 308 Winchester/7.62mm NATO, and 18" barrels for 300 Win Mag and 338 Lapua Mag. No barrel restrictions for 9MM and 300 BLK Subsonic. OAL is 5.10" - 7.60" and weighs 9.20-16.60oz. |
SU4735
Out of stock
SilencerCo Omega 45K Suppressor - 45acp
The Omega™ 45K is an exceptionally versatile suppressor. The Omega Ks are the smallest, lightest, and quietest silencers in their respective classes. Full auto rated and usable with pistols, rifles, and submachine guns, the Omega K series offers extreme durability in an ultra compact package and is compatible with 9mm as well as subsonic and supersonic .300 BLK. With the fully welded, tubeless, minimalist Omega K, big sound suppression now comes in a tiny footprint.
9MM: 137.7 DB
|
SU2254
Out of stock
SilencerCo Omega 9K Suppressor - 9mm
The Omega K is the smallest, lightest and quietest silencer in its respective class. Full auto rated and usable with pistols, rifles, and submachine guns, the Omega K series offers extreme durability in an ultra compact package. With the fully welded, tubeless, minimalist Omega K, big sound suppression now comes in a tiny footprint. 4.7" OAL, 1.48" Diameter and 7.2oz. |
SU1544
Out of stock
SilencerCo Osprey 45 2.0 Suppressor
The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights. The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer. 9MM to 45ACP & 300 BLK Subsonic 9.2OZ, 7.90" Length |
SU5185
Out of stock
SilencerCo Osprey 9 2.0 Suppressor - 9MM
The Osprey’s unique shape make it the only multi-caliber polygonal pistol silencer on the market. The monocore baffle design in a polygonal package allows for greater internal volume and therefore better sound performance. The Osprey utilizes a push button locking system for quick indexing. This system allows the majority of the suppressor to sit below the shooter’s line of sight, therby not impeding standard pistol sights. The Osprey 2.0 was designed to be used “wet” or “ dry.” Shooting “wet” temporarily improves sound suppression by inserting a small amount of ablative media. This can be done by inserting about 5cc’s (or a typical water bottle cap full) of clean water or clear wire pulling gel into the back of the silencer. 9mm & 300 BLK 8.8oz, 6.90" Length |
SU5184
Out of stock
SilencerCo Saker 556 ASR Suppressor - 556mm
The Saker ASR sets the industry standard for ease of use, modularity, and durability. It is designed for bolt action, semi-auto, and full-auto firearms. In addition to its performance, the Saker ASR's design allows for maximum user adaptability and convenience. ASR (Active Spring Retention) Mount technology facilitates attachment via a variety of different flash hiders, muzzle brakes, and direct thread mounts. The Hoplon Baffle deflects debris and increases suppressor lifespan on short barreled rifle and full auto applications using Stellite (Saker ASR 556 and Saker ASR 556K only). |
SU2255
Out of stock
SilencerCo Saker 556K ASR Suppressor - 556mm
The Saker ASR sets the industry standard for ease of use, modularity, and durability. It is designed for bolt action, semi-auto, and full-auto firearms. In addition to its performance, the Saker ASR's design allows for maximum user adaptability and convenience. ASR (Active Spring Retention) Mount technology facilitates attachment via a variety of different flash hiders, muzzle brakes, and direct thread mounts. The Hoplon Baffle deflects debris and increases suppressor lifespan on short barreled rifle and full auto applications using Stellite (Saker ASR 556 and Saker ASR 556K only). 11.8oz, 4.96" |
SU2256
Out of stock
SilencerCo Saker 762 ASR Suppressor - 7.62mm
The Saker® ASR sets the industry standard for ease of use, modularity, and durability. The Saker ASR was designed for bolt action, semi-auto, and full-auto firearms. In addition to its performance, the Saker ASR’s design allows for maximum user adaptability and convenience. ASR™ (Active Spring Retention) Mount technology facilitates attachment via a variety of different flash hiders, muzzle brakes, and direct thread mounts.
5.56 MM: 129.6 DB
|
SU2257
Out of stock
SilencerCo SCYTHE-TI 7.62 Suppressor - Black
The SilencerCo Scythe-Ti is a marvel in the world of sound suppression. This groundbreaking suppressor is SilencerCo’s first to be entirely crafted from titanium, setting a new standard for .30 caliber silencers. Designed for the discerning shooter, the Scythe-Ti combines ultra-lightweight construction with remarkable compactness without compromising on sound reduction. It’s also versatile, making the Scythe-Ti a great choice for hunting, long-range precision shooting, or recreational days at the range. Every shot protects your ears and puts a smile on your face. The Scythe-Ti is robust and capable of handling calibers from .223 REM/5.56 NATO to .300 RUM. It is suitable for both bolt-action rifles and semi-automatic platforms. Its titanium construction not only offers excellent durability but also makes it exceptionally light, allowing for effortless maneuverability and seamless integration with your favorite firearms. TECHNICAL SPECIFICATIONS
|
SU5490
Out of stock
SilencerCo Sprectre 9 Suppressor - Black
The Spectre 9 is the next evolution in SilencerCo’s collection of titanium suppressors. It’s completely constructed from titanium and designed for pistol and subgun platforms. The Spectre 9 is extremely lightweight due to its construction and compact for minimal impact. It’s a great option for personal protection, low-visibility applications, or days at the range. The Spectre 9 is compatible with 9MM and subsonic 300 BLK (full auto subs & semi auto supers). It’s even full-auto rated and one of the few suppressors that can run on a full-auto Glock. It’s compatible with the SilencerCo Alpha accessories and mounting systems and ships with a tool and the Spectre Piston Housing Assembly. Materials: Grade 5 Titanium & Grade 9 Titanium *Lead projectiles are not recommended for use with any of our sealed suppressors. |
SU5422
Out of stock
SilencerCo Switchback 22 Suppressor
The Switchback 22 is the best performing rimfire suppressor on the market. Modular, lightweight, with unmatched sound reduction, it provides three distinct lengths and is compatible with .22 LR, .22 WMR, .22 Hornet, .17 HMR, .17 WSM, and 5.7x28mm. The Switchback 22 is constructed of two titanium tubes, which interface through the use of a connecting stainless steel baffle. It features stainless steel baffles internally, which utilize SilencerCos Click Together Assembly (CTA) design. The design and combination of high strength materials ensure its longevity and durability even under hard use or full-auto rates of fire for its designated calibers.
|
SU5082
Out of stock
SilencerCo Velos LBP 7.62 w/ Muzzle Break
The Velos LBP uses a low back-pressure technology to reduce overall blowback while maintaining impressive sound suppression. The Velos LBP is constructed of a 3D printed inconel 625 core fully welded to 17-4 stainless steel front and rear modules, making this product unlike anything else on the market. It is also full-auto rated and the most durable suppressor SilencerCo has ever made. Ships with an Internal Charlie Flash Hider Front Cap, a Charlie ASR mount,ASR Muzzle Device, a spanner wrench, and a Charlie tool.
|
SU5419
Out of stock
SilencerCo Velos LBP Suppressor - 5.56mm
The Velos LBP is SilencerCo's answer for customers seeking optimal performance from a 5.56mm silencer. The balance of exceptional sound performance without adding back pressure to the operating system of the host firearm sets it above the rest. Incorporating newer manufacturing processes the 3d printed Inconel 625 core is fully welded to the 17-4 front and rear modules making this product unlike anything else on the market. |
SU5059
Out of stock