Products reviews

WOW! This rifle looks like it just rolled off the line in Yugoslavia. I will almost feel bad when i clean off the cosmoline and shoot it. It is PERFECT. Numbers match 100%, there is pencil (Real pencil) on the stock near the trigger guard that matches EP'd numbers near the trigger hole and under the rear sight. Stamped numbers match everywhere. This rifle looks NEW, not refurbished or ever used. Came with a mag pouch too! (Was missing cleaning kit and sling though, no biggie)

I'm going to keep this one for a long time to come!

Sent a email to Top Gun asking a question about Sig mags shocked at how fast I got a reply. Ended up asking a few more questions. I was very convinced they know their products. Ordered mags fast shipping and are exactly the same mags that came with Sig P226 TACOPS. They are 100% OEM .Have not actually ran them in Sig but lock up fine lock slide back and drop when released.

I just received my gun a few days ago. After doing a light exterior cleaning of the cosmoline, the gun appears to be in excellent condition. The stock looks to be unfinished, so that gives me another task to complete when I disassemble the gun to do a thorough cleaning.
I am very happy with the condition of the gun, however, I was a bit upset that the only thing that I received was the gun. It has no cleaning kit in it, no sling, or even the ammo pouch that they were all suppose to have. This is the only reason I give it 4 stars instead of 5.

Ordered 3 of these due to flush bases and the hybrid feed lips. Function has been great with ball and various hollow points through my Sig, Kimber and two RIA compacts. Slides all hold open without issue.

Works for both of the SIG SAUER P250 Generation 2 full-size 9MM and P320 Magazine is Universal with both firearms. The SIG SAUER P250C and P320C require an XGRIP Magazine adapter to close a small gap between the fiream magazine and the floorplate. Contact sales Reps for assistance when ordering XGRIP Magazine adapters.

Ordered from Top Gun Supply because of their great price. My first HK, the P30 is ergomic, well designed, reliable and the perfect size. I have smallish hands, and find it fits me great out of the box. My friend has large hands, and he said he liked the grip. It has run my various handloads fine. The sights howeve, are OK. There is not enough light around the front sight. I got Henie straight 8s. Great sights. Also got a short left side slide catch lever. The long one is kind of in the way of my time. Everything about the P30 is better than other popular platforms, like Glocks, except for the lesser 15 mag capacity.

Excellent magazines. Work perfectly in my M9. I bought three several months ago and have run several hundred rounds through them since with perfect reliability. At this price I will buy these over the Mecgar or factory Beretta magazines. If they get more in stock at $16.95 I will buy more.

Bought this about few month back from Topgun, great product in a fair price, and as usual they ship the items out fast.
this Sig tool are very solid and work as it needed.

I have a .22 cal. rifle with an 18" barrel and this cleaning rod is a perfect fit.
The quality of this cleaning rod is great. I would guess that all of Pro-Shot products are of the same high quality.
I also received great customer service when ordering this item!

This holster is perfect for my colt commander . Retentive n is outstanding . As for quality Ritchie gunleather is one of the best in the business . A small 3 man shop out of upstate NY fit finish and fix toon are absolutely superb .

Get yourself a good leather belt sized for these loops and the gun just disappears I personally use a milt sparks belt. I carry a firearm at least 14 hours a day everyday this holster makes it comfortable .

Love this weapon: the sights, the trigger, the grip that fits my large hand perfectly. Very accurate and repeatable.

Magazine loads easy and performs w/o any problems. It's a little pricey, but your getting a name brand & not some knock off. Which makes it worth the price.

The SKS that I received is from 1978. The gun was coated lightly in cosmo. Thankfully the cosmo wasn't heavily slathered on so cleanup was fairly easy. Included with the firearm is a leather ammo pouch. No cleaning kit or sling but not a big deal, really. The rifle has no pitting and no rust, not even surface rust. The bore's excellent, as advertised for a Grade A rifle. All metal parts are great. The wood stock had very little cosmo and, what was there, came off with little effort. After cleanup and oil, the grain in the stock looked and felt a lot better than expected. There are a couple very small handling nicks but they're only visible upon deep inspection. The gun hasn't been fired and I plan to keep it that way. The firearm is Grade A. My interaction with Top Gun has been nothing but positive. I'm glad that I purchased the rifle.

The price was good . holster let my gun ride low on my side. I have Glocks it will work with my 26 ,27 , 19 , 23 , . I would recommend it

I'm really happy with this purchase! I received a 1989, last year of manufacture, SKS 59/66 A1 with brand new leather stripper clip pouch. This rifle was never issued. It was lightly cosmolined, and stock appears to be unfinished. It's got a few smudges from handling and a minor dime sized dent that will steam out if I get the urge, or I may just leave it, it's that insignificant. There is scattered and very minor corrosion from long term storage in some spots. The only obvious one, if you're looking hard, is about the size of 1/4 of a dime on the rear top of the housing cover. No big deal. I'm guessing the storage crates support the gun there and adsorbed some moisture. The enclosed cleaning kit had some external corrosion but is completely useable. The stock ferrules have some scattered rust (tough to see) and a few small light ones (less than 1/8") on the wood-side edge of the trigger group. There is a little bit or rust under the gas tube just under the front of the top stock. The screw heads of the butt plate screws have rust but the integrity of the screws is not affected. The butt plate, trap door assemble is rusty inside (as is the spring at the bottom of the cleaning kit cavity) and although the spring to close the door is functional, it's not enough to close the door when you take your finger out. Generally speaking I mention the corrosion because it's there. I hate rust on a gun, but, I'm quite OK with the minimal amounts and where they're located. Don't look, don't tell as far as I'm concerned. The only one my critical eye caught right away was the one under my nose at the rear of the housing/dust cover. The ferrules and trigger group were mostly found by feel when I was cleaning the cosmoline. The cleaning kit and butt plate screws were obvious (when you stick the butt in your face)

I mentioned the stock is unfinished. It looks like a very straight and close grained piece of birch. It should take a nice finish with just a surface cleanup up of very fine steel wool. Oh, almost forgot, virtually no cosmoline inside the stock. Only a couple of spots which I may have caused upon dissassembly, which wiped right off. This is really OK to finish as you see fit as is. I may use a little acetone and whiting to clean out the internal spots. The outside looks devoid of cosmoline, just some finger smudges.

The bluing is superb and the piston looks like it's chromed, although the Yugoslavian SKSs did not have chrome bores. I wiped down the metal parts with some Kroil and the cosmoline came right off (again, very little, just enough to almost do a perfect anti-rust job. The bolt is almost immobile from the cosmoline, so that, and the bore and internal gas tubes, still need to be done. Not a big deal, strip down is quite easy, no tools necessary, except a bullet or screw driver to push the trigger group release. With that clean up done it's ready to shoot (or just plain admire). Even the internal machining, which you wouldn't see is none cleanly.

The shipping package was open at one end and had been kind of re-taped a little by UPS, but still open so I don't know if a sling was included from my container and fell out or not. No big deal. Absolutely no damage to remaining contents. Thanks Top Gun Supply!

As a longtime 1911 aficionado, I have to say this is one of the finest pistols of any era, mark or style- in my experience, tied only with my 1 1/2 MOA Premier II.
It shoots effortlessly, the added weight is not noticeable in a negative way, rather really only makes itself know when living up to it's role "as advertised", with its added stability for follow-up shots and reduced felt recoil.
Just an all around stunning piece of master craftsmanship- a true legacy firearm destined for heirloom status.

Non brass case 115gr, price was right, great for target practice, TopGun ship super fast. All the way 5 Stars,Thank you

This recoil systems delivers some obvious advantages to the my XD.

I have always loved Blazer Aluminum for in expensive target practice. It is accurate and cheap. Great stuff!

I'd been looking for this part to convert my V3 HK USP .45 into a V1 for several weeks, but until now I hadn't found one in stock anywhere. It was delivered shockingly fast, and was the best price that I've found anywhere. Very easy installation, completely drop-in.

These are just what you need if you convert your old-style Sig Sauer P250 to the new X-Grip. These will allow you to convert your old magazines. I verified that it works without a hitch.

I needed to replace the Crimson Trace Grip on my old Sigpro 2340/.40 Cal with a standard grip. As most SigArms/Sig Sauer users know, the SP 2009/2340 was replaced with the SP 2022 years ago. After checking with SigArms customer service and finding out that that they discontinued SP 2009/2340 parts, including the grips, and that the SP 2022 grip is incompatible, I searched the web for other vendors who still carried the old Sigpro grips and found Top Gun Supply. As Brad told me, their OEM SP 2340 grip snapped right in. It's a perfect fit. Thanks Brad

Bought this magazine for my P320C along with the xgrip adapter and I'm so happy I did! Asking with a hand written thank you note they Came quickly and now I get to have a couple more rounds to train with thank you guys for providing excellent service and satisfaction!

This is a top quality mag very nice.

Works great in my P226! Didn't work at all in my P228. Maybe my 228 is out of spec, or this kit won't work in the 228.