5345 Results Found. Displaying Results 5301 - 5325
Rob, about Sig Sauer E2 Grip Kit P226 DAK
Jan 5, 2016
Put this E2 grip on an older model P226 in less then 5 minutes. The E2 grip does make a shorter trigger reach for smaller hands. The texture affords a better grip surface also. For ease of installation, make sure your hammer is in full collapse position when returning main spring assembly into position. A small screwdriver is all that is needed to remove main spring assembly.

Was the above review useful to you?
Yes (
2)
/
No (
0)
Dale, about Bar-Sto Conversion Barrel - Sig P226 9mm
Oct 24, 2015
While 80%+ seem to have it drop in, I wasn't that lucky. Did require slight fitting on the barrel hood. Once that was done, superb! Function tested it with several of my different reloads with no problem even when using the .40S&W/357SIG recoil spring and magazines! Did start with a 9mm magazine but am thrilled not to have to but more. Will be using this a lot for practice.

Was the above review useful to you?
Yes (
13)
/
No (
1)
Guest, about Glock .40SW 22RD Magazine
Wasn't worried about the price when I ordered a few of these. Makes for more fun at the range! Work perfectly and Top Gun service is great!

Was the above review useful to you?
Yes (
2)
/
No (
0)
Guest, about Glock 22/35 .40 S&W 15RD Magazine
Got a few of these with the X-Grip adapter to kick my 23 up a few rounds. Fit 'n finish is factory perfect. Thanks Top Gun!!

Was the above review useful to you?
Yes (
0)
/
No (
0)
Guest, about Glock 22/35 .40 S&W Magazine - 10 ROUND
I ordered two mags on a friday night and i had them at my door on monday. That was in december i really did not expect them that fast. I got the items i ordered with no problems. The web site was easy to navagate and checkout was just as easy. I could not be more happy. I honestly apreciate the awsome customer service i got, there was even a handwriten thank you from Rachel on my invoice. I will be shopping at Top Gun Supply again. Keep up the good work Top Gun Supply

Was the above review useful to you?
Yes (
0)
/
No (
0)
Guest, about H&K P30, VP40 .40SW 13RD Magazine
Perfect fit 'n finish and only the best for my HK.!. And the folks at Top Gun got them to me fast! I'm a fan and will be back!!

Was the above review useful to you?
Yes (
5)
/
No (
0)
Guest, about Mec-Gar SIGPRO 2022/2009 9mm 17RD magazine
I purchased (4) of these mags for my SP 2022. Like all Mec-Gar mags that I've used, they function as advertised, and feed better than the OEM ags included with the pistol. I'll definitely be buying more.
Top Gun Supply also shipped my order promptly and without any delay, even around the holidays.
Buy with confidence!

Was the above review useful to you?
Yes (
1)
/
No (
2)
Guest, about Mec-Gar SIGPRO 2022/2009 9mm 17RD magazine
I purchased (4) of these mags for my SP 2022. Like all Mec-Gar mags that I've used, they function as advertised, and feed better than the OEM ags included with the pistol. I'll definitely be buying more.
Top Gun Supply also shipped my order promptly and without any delay, even around the holidays.
Buy with confidence!

Was the above review useful to you?
Yes (
0)
/
No (
2)
Guest, about Mec-Gar SIGPRO 2022/2009 9mm 17RD magazine
I purchased (4) of these mags for my SP 2022. Like all Mec-Gar mags that I've used, they function as advertised, and feed better than the OEM ags included with the pistol. I'll definitely be buying more.
Top Gun Supply also shipped my order promptly and without any delay, even around the holidays.
Buy with confidence!

Was the above review useful to you?
Yes (
2)
/
No (
0)
Guest, about Glock 42 .380 - Black
This gun is fantastic. It feels great in my hand and with the standard Glock sights, it is very target friendly. I've shot over 500 rounds through this gun without a single problem. I strongly recommend you buy the Glock 42.

Was the above review useful to you?
Yes (
5)
/
No (
0)
Guest, about H&K VP9 9mm Striker Fired Optics Ready
Great service as usual from Top Gun Supply! Very pleased with the HK VP9. Extremely accurate with HK quality. HK set a new standard for striker fired handguns!

Was the above review useful to you?
Yes (
7)
/
No (
0)
Guest, about Milt Sparks VM2 Sig P220/226R - Rail
The quality you'd expect for the price, and then some. Perfect, lofty ride height. Cant is 18° - 20° which might sometimes leave just a bit to be desired but that comes down to personal preference. The VM2 is a thing of beauty, folks.

Was the above review useful to you?
Yes (
5)
/
No (
0)
Guest, about Ritchie Leather Belt Speed Scabbard - Sig Sauer P228 or P229 Optics Ready
I won this holster along with a Sig P229 from Top Gun Supply. I use it almost everyday as my concealed carry holster. With a shirt untucked, this holster holds the Sig discreetly, securely and comfortably all day. It's a beautiful piece of leather and I plan on getting Ritchie Leather for my other pistols.

Was the above review useful to you?
Yes (
2)
/
No (
0)
Guest, about Hogue Rubber Monogrip for Smith-Wesson J Frame Round Butt
After going to. The range shooting my 642 centennial with the stock boot grips. Recoil was excessive ..then fired P+ in my 16 oz gun. skin taken off web of hand after only 5 shots!!! Glad to have bought these Hogue monogrips..they absorb the recoil & the rubber covers the backstrap all the way up protecting the web of my hand ! Strongly recommend them installation in 5 min. A little larger than the stock boot grips,but worth it..I have no problem with concealment in my alessi I.W.B. holster..

Was the above review useful to you?
Yes (
0)
/
No (
0)
Guest, about Sig Sauer P229-1 E2 9mm 10RD magazine - 10 ROUND
I have bought a few of these mags last couple years. The mags are well built and have a nice blued finish. They are made in Italy as well. They are not cheap but then again it is a Sig Sauer product.

Was the above review useful to you?
Yes (
3)
/
No (
0)
Guest, about Mec-Gar P229 .40/.357 14RD Extended Magazine, AFC
Have bought several of these mags with intentions to buy several more. These are OEM mags just without the SIG name on the side. Never had an issue with these at all! Can't go wrong with Mec-Gar.

Was the above review useful to you?
Yes (
10)
/
No (
0)
Guest, about Sig Sauer Decocking Lever - P227, P226, P228, P229 BLUE
Great product. I needed this to replace a factory decocking lever that had originally came on my Sig Sauer P226 MK25 pistol, which was riding too high against the frame and scratching it. It was suggested on the SigTalk forum that I purchase one of these factory decocking levers regarding my issue. This one that I ordered has a larger, more pronounced hump (which is a good thing) compared to the decocking lever that came with my gun. After installation, I noticed this one that I ordered is built to better spec which doesn't have the extra slack that would ride against the frame like the old one did and sits much noticeably lower. I also noticed that the decocking lever has a more positive operation. Thanks Top Gun Supply!

Was the above review useful to you?
Yes (
2)
/
No (
0)
Guest, about Smith & Wesson M&P SHIELD 2.0, 9mm
This is my first gun and I love it. It is the right size and weight. I like it best with the 8rd magazine because it fits my hand better. I bought two extra 8rd magazines and I keep the 7rd for practice at the range. While I don't have a ton of experience with guns, this one feels right and fits right.

Was the above review useful to you?
Yes (
11)
/
No (
1)