Surefire

The Surefire G2X Pro is a powerful dual-output, polymer bodied flashlight that uses a high efficiency LED. Two output levels: a high 320 lumen (2 3/4 hour run time) and a low 15 lumen (45 hour run time) allow the user to select based off of current needs. A simple tailcap switch for easy on/off in both momentary and constant modes. The tough Nitrolon® polymer body keeps the flashlight lightweight and weatherproof as well as being scratch, abrasion, and corrosion resistant.

The Surefire SOCOM556-RC2 Fast-Attach suppressor is one of the most advanced 5.56mm suppressors ever made. Compact and lightweight, the RC2 was selected for use in the MK18 and M4 carbine by USSOCOM after the most extensive and rigorous suppressor evaluation in history. It has also received the USSOCOM official safety verification in support of fielding.

Constructed of advanced high-temperature alloys and stainless steel, the SOCOM556-RC2 features a more advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the user. The new design also includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design along with proprietary improvement in gas flow dynamics nearly eliminates first-round flash and attenuates noise and dust signatures to an unprecedented degree. Securely mounts to a SureFire muzzle brake or flash hider via the patented Fast-Attach design which attaches and removes in seconds.

-Length: 6.2 inches

-Weight: 17.0 ounces

-Diameter: 1.5 inches

The Surefire SOCOM762-RC2 Fast-Attach suppressor is one of the most advanced 7.62mm suppressors ever made. Compact and lightweight, the RC2 was selected for use in the MK13 rifle by USSOCOM after the most extensive and rigorous suppressor evaluation in history. It has also received the USSOCOM official safety verification in support of fielding.

Constructed of advanced high-temperature alloys and stainless steel, the SOCOM762-RC2 features a more advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the user. The new design also includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design along with proprietary improvement in gas flow dynamics nearly eliminates first-round flash and attenuates noise and dust signatures to an unprecedented degree. Securely mounts to a SureFire muzzle brake or flash hider via the patented Fast-Attach design which attaches and removes in seconds.

-Length: 8.4 inches

-Weight: 19.5 ounces

-Diameter: 1.5 inches

Powerful, lightweight and compact, the 6PX Pro utilizes a high efficiency dual-stage 320 lumen/ 15 lumen LED light with a precision reflector that creates a smooth, optimized beam. Hard anodized and made from high grade aerospace aluminum, the 6PX is sculpted for a sure grip in any weather condition as well as being fully weatherproof. Run time of 2 3/4 hours on high and 45 hours on low.

The P2X Fury Tactical is a single-stage 600 lumen flashlight that is compact and pocket sized with a length of only 5.4 inches. A simple tailcap switch activates 600 lumens of blinding white light with a smooth, far-reaching, comparatively wide beam with a bright central area that’s perfect for tactical and general use. High strength aerospace aluminum body is hard anodized and sculpted for use in all weather conditions.

The SureFire RYDER(TM) 22-S is a lightweight suppressor optimized for .17 HMR and .22 Long Rifle rimfire pistols and rifles. Built to exacting standards like our Fast-Attach(R) suppressors for centerfire calibers, the Ryder 22-S features a patented aluminum body with rounded ends and flutes to reduce weight with no sacrifice in strength, and is coated with a tough Mil-Spec hard-anodized finish that resists scratches, abrasion, and corrosion. At just over 5 ounces in weight and only 5.4 inches long, the compact RYDER 22-S minimizes effects on your weapon's weight and maneuverability. The RYDER 22-S features patented heat-treated stainless steel baffles that offer increased durability and are capable of handling 17 HMR and .22 WMR ammunition - even full-auto fire. Built-in spacers between the baffles help to reduce carbon buildup and keep the suppressor clean longer. The indexed, individually numbered baffles are easy to remove, disassemble, clean, and reassemble. The RYDER 22-S has a stainless steel back plate that contributes to overall durability. Single-point cut 1/2 X 28 threads provide secure and easy attachment to an appropriately threaded .22 caliber barrel, with no tools required. Simply screw the suppressor on until hand tight; unscrew it to remove. The RYDER 22-S comes standard with an included assembly/disassembly tool for removing the baffle stack and reassembling it after cleaning, and a spud-extension tool that aids in pushing the baffle stack out of the body tube.

The Surefire SOCOM556-RC2 Fast-Attach suppressor is one of the most advanced 5.56mm suppressors ever made. Compact and lightweight, the RC2 was selected for use in the MK18 and M4 carbine by USSOCOM after the most extensive and rigorous suppressor evaluation in history. It has also received the USSOCOM official safety verification in support of fielding.

Constructed of advanced high-temperature alloys and stainless steel, the SOCOM556-RC2 features a more advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the user. The new design also includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design along with proprietary improvement in gas flow dynamics nearly eliminates first-round flash and attenuates noise and dust signatures to an unprecedented degree. Securely mounts to a SureFire muzzle brake or flash hider via the patented Fast-Attach design which attaches and removes in seconds.

-Length: 6.2 inches

-Weight: 17.0 ounces

-Diameter: 1.5 inches