Aero Precision

Includes:

• Magpul MOE Grip
• Bolt Catch
• Bolt Catch Spring and Buffer
• Safety Selector
• Safety Selector Spring and Detent
• Buffer Retainer and Spring
• Takedown and Pivot Pins
• Takedown and Pivot Pin Springs and Detents
• 4-40 Set Screw

Includes:

• Takedown/pivot Spring
• Takedown/pivot detent
• Takedown pin
• Pivot pin
• Bolt Catch
• Bolt Catch Spring
• Bolt Catch buffer
• Bolt catch roll pin
• Safety Selector
• Safety Selector spring
• Safety Selector detent
• 4-40 Set Screw (for threaded takedown pin detent hole)
• Buffer retainer
• Buffer retainer spring
• Magpul MOE-K2® grip
• Pistol grip screw

The Aero Precision Adjustable Gas Block allows the user to finely tune their gas system for any application. This is particularly useful for managing excess gas to reduce blowback on suppressed firearms, or competition builds where the shooter is looking to mitigate recoil.

Features:

• Front and rear picatinny rail
• Eliminated center of top rail for weight reduction
• Indexing grooves in 12:00 position for positive grip control
• Quick disconnect sling socket at the 3, 6 and 9 o’clock positions
• Compatible with low profile gas blocks
• 1.3” Inside diameter
• 1.5” Outside diameter
• Compatible with mil-spec AR15 upper receivers and barrels

The Aero Precision BREACH® is a rugged, ambidextrous, precision-manufactured charging handle for the M5/AR308 platform. The BREACH's design utilizes a reinforced 7075-T6 aluminum bar that is up to the most demanding tasks. Its ambidextrous levers feature a patent-pending, dual spring system, that directs the force-of-use into the robust charging handle body. This allows the shooter to use a one-sided charging technique without compromising the part — a pitfall for traditional charging handles.

The large lever configuration provides an extended operating surface, perfect for a user with bigger hands, or someone who wants a larger surface for manipulation of the charging handle.

NOTE: This charging handle is NOT compatible with Sig Sauer 716, Savage MSR10, or Smith and Wesson M&P10 rifles as they utilize a proprietary design.

FEATURES:

• Ambidextrous Controls: Ergonomically designed 7075 Aluminum levers allow the user to easily charge their firearm with either hand, while remaining low profile and comfortable when slung.
• Robust Construction: Reduced chamfer angles on the 7075 Aluminum reinforced bar design provide a strong foundation for the BREACH® that is resistant to rotational flex or breakage.
• Patent-pending Lever Mechanism: Transfers force-of-use away from the roll pins and into the top/head portion of the reinforced bar protecting the charging handle in the most demanding circumstances.
• Gas Deflection Shelf: Aligns with the upper receiver to redirect gas flow away from the users face when shooting suppressed.
• Functional Design: It is not all just good looks. Stylistic cuts on the charging handle also help to clear stuck on carbon and debris from the upper receiver, while the spacer design seals and protects the lever mechanism from debris.

Aero Precision .308/7.62 Nickel Boron BCG is an eye catching addition to your AR build. Exacting dimensions and superior coating ensure the highest quality and correct component interface.

Features:

• No Aero 'A' Logo
• Machined from 8620 Tool Steel (Carrier) and 9310 Steel (Bolt)
• Nickel Boron coated
• Bolt is machined from 9310 steel
• MPI
• Forward Assist serrations
• Weight: 17.92oz

BCG Includes:

• Bolt carrier
• Complete bolt
• Firing pin
• Cam pin
• Retaining pin

Compatible with LR-308, SR25 and DPMS Pattern

Features:

• M16-cut carrier
• Machined from 8620 steel
• Carrier has forward assist serrations
• Black Nitride Finish - advanced lower friction coating that minimizes the need for lubricants and cleaning
• Properly staked gas key
• Chrome lined gas key and firing pin channel
• Machined from Carpenter 158 tool steel
• Shot peened
• HPT/MPI and marked
• Black o-ring insert on extractor

Aero Precision No Logo M16 cut colt carrier group. Machined from 8620 Tool Steel (carrier) and 9310 Steel (bolt). Black Nitride finish, properly staked gas key, shot peened, HPT tested and black o-ring insert on extractor. Made in the U.S.A.

• Machined from 8620 Tool Steel (Carrier) and 9310 Steel (Bolt)
• Carrier has forward assist serrations
• Shrouded firing pin
• Nickel Boron Coating inside and out (Bolt, Carrier, and Gas Key)
• Forged Mil-Spec gas key attached with Grade 8 hardware and Properly staked.
• 5.56 Bolt is shot Peened and MPI
• Mil-Spec Extractor Spring, black extractor insert, Viton O-Ring
• Tool Steel Extractor
• High quality BCG

Features:

• M16-cut carrier
• Machined from 8620 steel
• Carrier has forward assist serrations
• Mil-Spec Phosphate Coating
• Properly staked gas key
• Chrome lined gas key and firing pin channel
• Machined from Carpenter 158 tool steel
• Shot peened
• HPT/MPI and marked
• Black o-ring insert on extractor

The AR15 Assembled Upper Receiver comes with the port door and forward assist already installed. Forged from 7075-T6 aluminum, this assembled upper is precision machined to mil- spec M16/M4 specifications and features M4 feedramps. Match this upper with one of our AR15 lower receivers for a solid and dependable fit.

Features:

• M4 Feedramps
• .250 takedown pin holes
• Port door and forward assist installed

Includes:

• AR15 Assembled Upper Receiver in OD Cerakote H-232Q

The new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.

All hardware mounting parts are included with the purchase of an ATLAS Handguard.

Includes:

• AR15 Gen 2 Lower Receiver - Anodized Black
• M4 Stock - Black
• A2 Grip - Black
• Mil-spec Lower Parts Kit
• Carbine Receiver extension
• AR15 Carbine Buffer and Spring
• These parts are installed

Aero Precision AR15 Complete Upper featuring the Gen 2 ATLAS S-ONE Enhanced Handguard. Key features include front and rear picatinny rails, eliminated top center of rail for weight reduction, compatible with low profile gas blocks.

Gen 2 Upper Features:

• .223 Wylde 16" Midlength Barrel
• .750 gas block journal
• Mid-length gas system, .0785 gas port
• M4 Feed Ramp Extension
• HP and MPI tested
• Standard A2 flash hider
• 15" ATLAS S-ONE M-LOK handguard
• Does not include BCG or Charging Handle

This lower parts kit does not include the fire control group, pistol grip or trigger guard.

Includes:

• Takedown/pivot Spring
• Takedown/pivot detent
• Takedown pin
• Pivot pin
• Bolt Catch
• Bolt Catch Spring
• Bolt Catch buffer
• Bolt catch roll pin
• Safety Selector
• Safety Selector spring
• Safety Selector detent
• 4-40 Set Screw (for threaded takedown pin detent hole)
• Buffer retainer
• Buffer retainer spring
• Magazine catch body
• Magazine catch spring
• Magazine catch button

The Aero Precision M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, we have added several functional features to the lower receiver to simplify the assembly process for the at home builder.

M4E1 Lower Receiver Improvements:

• Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.
• Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon.
• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Threaded Takedown Pin Detent Recess - Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room).
• Increased Magwell Flare - Increased the flare of the magwell to aid in quick and efficient magazine changes.
• Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well.

Includes:

• Stripped M4E1 Lower Receiver
• Nylon tipped tensioning set screw
• Threaded Bolt Catch Pin

Factory BLEMs.

The Aero Precision M4E1 Lower Receiver delivers billet aesthetics in a forged package. This custom designed enhanced forging is machined from 7075-T6 Aluminum and compatible with all mil-spec AR15 parts. Aside from the visual upgrades this custom engineered design provides that challenge much more expensive billet options, we have added several functional features to the lower receiver to simplify the assembly process for the at home builder.

M4E1 Lower Receiver Improvements:

• Threaded Bolt Catch Roll Pin - Allows for simple installation of the bolt catch and virtually eliminates the chance to damage the finish during installation (pin included). 1/16" Hex Key required for assembly.
• Integrated Trigger Guard - Eliminates the possibility of breaking the trigger guard tabs by integrating the trigger guard into the lower, creating a stronger more rigid platform to build upon.
• Upper Tension Screw - Allows users to fine tune the fit of the upper and lower receiver using a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. This provides a tight fit with any standard AR15 upper receiver.
• Threaded Takedown Pin Detent Recess - Allows user to easily install the Takedown Pin detent and spring with the use of a 4-40 set screw (no more launching detents across the room).
• Increased Magwell Flare - Increased the flare of the magwell to aid in quick and efficient magazine changes.
• Marked and milled to accept short-throw safety selectors, but will work with standard selectors as well.

Includes:

• Stripped M4E1 Lower Receiver
• Nylon tipped tensioning set screw
• Threaded Bolt Catch Pin