Magpul Industries - Manufacturers - Top Gun Supply

The Gen 2 Magpul MS3 Multi-Mission Sling was designed for easy, rapid conversion between a single-point and two-point sling. The MS3 allows the user to exploit the maneuverability of a one point sling, or the stability of a two point sling. Single hand adjustments and quick release make this a very versatile and user friendly platform. Set up for clip-style front and rear sling attachment points.

Filling the same mission requirement as the standard MS3 Sling, the MS3 Single QD can quickly switch between one-point and two-point configuration. The MS3 Single QD maintains material construction and specifications identical to that of the standard MS3, but features a heavy-duty push-button QD Sling Swivel for the one-point (rear) weapon attachment rather than the Magpul Paraclip(TM). This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, and buttstocks. The MS3 Single QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations. Made in U.S.A.

The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o'clock positions on M-LOK compatible hand guards and forends. The Offset Light/Optic Mount allows for the direct attachment of the Surefire M300/600 series of Scout Lights or other MIL-STD-1913 Picatinny light and optic mounts. Made in the USA.

Lightweight but incredibly strong, Magpul's PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines.It's unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring. They've also included a rounds-remaining rear window, a high-visibility follower and a capacity indication roller.

Please check restricted shipping zones before ordering.

Supplemental dust covers for the Gen 2 PMAG models. Designed to reduce debris intrusion, and cartridge damage during transport or storage. 3 Pack.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in U.S.A.

The Magpul Original Equipment stock is an economical drop-in option while still maintaining the quality and durability you expect from any Magpul products. The Magpul MOE is a direct replacement for the M4 collapsible buttstock using a mil-spec size buffer tube.

The Magpul MOE Vertical Grip features a light weight and inexpensive option for an AR15 rifle forward vertical grip. Designed to work with the MOE handguards including the required mounting hardware. Black textured polymer.

The Magpul MS4 Gen 2 Dual QD Sling features the same ability as the MS3 to switch between a one point and a two point sling, but features two heavy-duty push-button QD sling swivels rather than the Magpul Paraclip. This allows for capatability with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling mounts, including the Magpul RSA-QD. The Gen 2 MS4 features a low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover and new slimmer, flared floorplate that aids in extraction while providing improved drop protection. The Gen M3 PMAG is designed to work with both Colt and non Colt-spec rifles such as the HK MR556 and FN SCAR which have tighter mag well tolerances. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

Please check restricted shipping zones before ordering.

The Magpul Ambidextrous Sling Attachment Point (ASAP) allows for a range of motion greater that 180 degrees, allowing for easy right or left hand weapon manipulation. Replaces the standard AR15 Carbine stock receiver end plate and works with single point type slings with snap hook style attachment. Compatible with both commercial and mil-spec buffer tubes. Made from precision cast black manganese phosphatized steel.

The Magpul B.A.D. Battery Assist Device is a quick and easy modification to AR-15 / M-16 rifles that allows the shooter access to the bolt catch from the right side of the receiver. This provides easy operation without shifting your grip on the rifle to close the bolt. Includes B.A.D. Lever assembly with Torx wrench.

The Magpul M-LOK Bipod Mount allows for the attachment of most Harris-style stud mounted bipods to M-LOK compatible hand guards and forends. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. It features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Made in the USA.

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards. Made in U.S.A.

The next generation .308 PMAG features numerous improvements over the original .308 PMAG. The Gen M3 PMAG features a self lubricating, anti-tilt follower, high quality stainless steel magazine spring, visual window for easy round count inspection, paint pen dot matrix for numbering, flared floorplate and aggressive front and rear texture for positive magazine handling. For SR25/M110 pattern rifles.

Please check restricted shipping zones before ordering.

Magpul AFG2, angled fore grip takes natural ergonomics into consideration with this new, unique design. Comfortable positioning to the fore grip provides precise control and lower fatigue, while improving accuracy. A shorter, slim design for a higher compatibiltiy with a variety of rail systems.