Magpul Industries - Manufacturers - Top Gun Supply

The PMAG 27 GL9 is a 27-round Glock 9mm magazine featuring our proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Meeting the overall length requirements for a 170MM competition magazine, the PMAG 27 GL9 offers additional capacity without the need for expensive extensions.

Includes a high visibility, controlled-tilt follower, a stainless steel spring, and an easily removable floorplate for cleaning. Also includes a paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and capacity indicator windows. Drops free when loaded or unloaded.

The PMAG 27 GL9 is compatible with all full-size, compact, and sub-compact double-stack Glock 9mm variants with some protrusion below the grip.

Made in U.S.A.

FEATURES

• Compatible with all 9mm double-stack Glock handguns
• Durable, lightweight, and rigid polymer construction
• High visibility, controlled-tilt follower
• Long-life stainless steel spring for corrosion resistance
• Flared, easily removable floor plate
• Dot matrix panel for magazine marking and identification
• Magazine indicator windows on both sides of body at 10, 15, 20, and 27 rounds remaining
• Drops free when loaded or unloaded

Made in the USA, this Magpul sling system starts as an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The colored webbing has Near Infrared (NIR) treatment to reduce IR signature, and this sling can be adjusted with the MS1 Slider.

The next generation .308 PMAG features numerous improvements over the original MAG243 .308 PMAG. The Gen M3 PMAG features a self lubricating, anti-tilt follower, high quality stainless steel magazine spring, paint pen dot matrix for easy numbering, flared floorplate and aggressive front and rear texture for positive magazine handling. For SR25/M110 pattern rifles.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.

Please check restricted shipping zones before ordering.

Please check restricted shipping zones before ordering.

The PMAG 21 GL9 is a 21-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. Features a High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 21rd indicator windows. Drops free loaded or unloaded. Compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip. Made in U.S.A.

Made in the USA, the Angled Fore Grip is compatible with most any M1913 Picatinny-railed hand guard. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. It features a polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style" surface or an "A2-style" finger nub. All mounting hardware is included.

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.

Please check restricted shipping zones before ordering.

Made in the U.S.A, the PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO/223 Rem. Similar to the MOE PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning. The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off impact / dust cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit. Medium Coyote Tan Finish.

Please check restricted shipping zones before ordering.

The 7.62x51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles in the smallest possible magazine size.

Ideal for hunting applications with the addition of our Minus Five Round Limiter, for use in states where overall capacity is limited, or with precision platforms using longer than SAAMI-spec match ammunition up to 2.830" OAL. Perfect for use with a bipod or when shooting off of a pack.

Made in U.S.A.

FEATURES

• Optimized for use with 7.62x51 M118LR or other .308 Winchester ammunition with a max OAL of 2.830"
• Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
• True 10-round capacity that does not require limiters, pins, rivets, etc.
• Next-generation impact and crush resistant polymer construction
• Constant-curve internal geometry for smooth feeding
• Anti-tilt, self-lubricating follower for increased reliability
• High-quality stainless steel spring for corrosion resistance
• Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
• Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit

The next generation PMAG that features a long life stainless steel spring, anti-tilt follower, removable dust cover, low profile ribs, agressive front and rear texture, paint pen dot matrix to allow for easy numbering, and new slimmer, flared floorplate that aids in extraction while providing improved drop protection.

Please check restricted shipping zones before ordering.

Made in the USA, the MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also make it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included. NOTE: The MOE K grip will also fit most 7.62 NATO AR10/SR25 style of rifles.