Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P320 X-FIVE - SUPER BLACK Finish

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – P320

• Brass (P320 Extended Pad) – 3.75 ounces
• Brass (P320 Standard) – 1.1 ounce
• Grayguns Hard Duty Use Aluminum Pads (P320) – About 1 ounce
• OEM P320 base pads – About .20 ounces

For the P320 series, base pads are designed to work with full-size magazines in X-Series grip modules with – and without – the magwell installed. Will work with 21-round magazines and will work with standard P320 grip modules.

Base pads are compatible with new SIG P320 magazines with the square pegs. 1 per package.

Bruce Gray combined the best of both worlds when he designed what we know as the hybrid trigger.

The unique face allows the shooter can take advantage of finger placement lower on the face, with the comfort of a traditional curved face. This hybrid design reduces trigger weight while preserving all mechanical safety values.

The Grayguns P320 Hybrid Trigger uses internal leverage changes to yield superior trigger pull, while supporting the voluntary upgrade’s enhanced reliability and rough handling performance qualities.

Includes our adjustable over-travel stop design to shorten reset and take out all gross over-travel. Designed for easy drop-in installation.

Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program.

Specifications and Features

• Specifically designed for P320s with current fire control unit components, or those who have gone through SIG’s Voluntary Upgrade Program
• Adjustable over-travel to help reduce reset and take out wasted motion
• Reduces total trigger pull weight approximately 2 pounds below factory-stock for the standard series, and about 1.25 pounds for the X-Five variant
• Designed for use with the SIG factory trigger bar spring
• Minimal over-travel, stops at optimum trigger face angle
• Smoother takeup and release sensation
• Preserves factory sear engagement and mechanical safety values
• Proven reliable and durable for high-volume professional use
• Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

From Grayguns, a Master Spring Set for Sig Sauer P-Series handguns. The P-MSS kit is an action upgrade package designed to reduce trigger pull weight while still providing reliable primer strikes. This set includes two mainsprings, one 17 lb. and one 19 lb., and a competition sear spring.

Fits the modern P-Series handguns with a DA/SA system, P220, P224, P225A1, P226, P227, P228, P229 and P-226 X-Five Allround.

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This trigger is machined from tough steel. The trigger is carefully heat treated and finished in black oxide. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

• X5 All-Round
• P220 (see exceptions below)
• P226
• P228
• P229
• P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width

Intended to be installed by a qualified Sig Sauer armorer or gunsmith

Brass Base Pads are perfect for competitors looking to add weight to their pistol. As compared to our 6061 Aluminum pads with anodized coating for the P320, P226 or VP9/P30 the Brass Base Pads are significantly heavier; more than triple the weight.

For USPSA Production, ensure you weigh your setup to ensure you are under the maximum weight limit.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – VP9 & P30

• Brass (VP9/P30) – 1 ounce
• Grayguns Hard Duty Use Aluminum Pads (VP9/P30) – About .3 ounces

A spacer – shown in photos – is included for use with 15-round magazines. No spacer is required for the 17-round magazines.

These custom Grayguns HDU magazine base pads have been built for military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic base pads.

Also appropriate for competition and shooting enthusiasts looking for a quality, durable upgrade.

Backwards compatible with all versions of P320 modules, including the standard and xSeries with or without the extended magwell installed.

• This is the Standard Version – Designed for the XSeries without the magwell. Also works with the P320 module.

Note: These base pads are compatible with new SIG P320 magazines with the square pegs.

Developed by the renowned gunsmiths of Grayguns, the FAT guide rods are designed to optimally support factory Sig Sauer, and Grayguns custom multi-strand springs for maximum service life and smooth, reliable function. Designed to the maximum nominal diameter to fit each pistol perfectly, FAT rods also eliminate the possibility of coil-jumping and damage when used with correctly-selected after-market single strand recoil springs. Grayguns FAT rods are hardened and stress-relieved to withstand a lifetime of hard use as well as being carefully polished stainless or finished in ultra-durable Super Black. Lifetime guarantee against galling, ringing or breakage. Simply put, some of the highest quality guide rods available today.

Fits Sig Sauer P228 and P229 - Super Black Finish

The new Grayguns P320 Adjustable Straight Competition Trigger System delivers the unequalled smooth feel and hot performance of our custom action work in a cleverly engineered drop-in kit.

Paired with Bruce Gray’s exclusive straight trigger design, this is the most advanced drop in competition system available for all post/Voluntary Upgrade P320 models.

The P320 Competition Adjustable Straight Trigger System is intended for installation by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit.

The kit includes the following exclusive Grayguns elements:

• Our newly designed straight trigger with built in over-travel adjustment
• Precision-ground custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
• Grayguns original competition sear springs
• Intermediate competition sear springs
• Original soft competition trigger bar spring
• New snappy-reset trigger bar spring
• Micro-polished, extended safety lever pin

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five, Legion and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer. Note – The safety lever spring is no longer needed in the P320, and is not included in the kit.

The new Grayguns P320 Competition Trigger System delivers the unequalled smooth feel and hot performance of our custom action work in a cleverly engineered drop-in kit.

Paired with Bruce Gray’s exclusive hybrid trigger design, this is the most advanced drop in competition system available for all post/Voluntary Upgrade P320 models.

The P320 Competition Trigger System is intended for installation by an armorer, gunsmith or skilled individual who is familiar with the P320 fire control unit.

The kit includes the following exclusive Grayguns elements:

• Our newly designed hybrid trigger with built in over-travel adjustment
• Precision-ground custom sear, polished and finished in hard nickel PTFE. Specifically designed for competition or range use only.
• Grayguns original competition sear springs
• Intermediate competition sear springs
• Original soft competition trigger bar spring
• New snappy-reset trigger bar spring
• Micro-polished, extended safety lever pin

Specifications and Features

• Specifically intended for use only in P320s that have gone through SIG’s Voluntary Upgrade Program.
• Reduces trigger pull weight to suit your preferences, with additional springs provided to yield custom pull weights.
• Adjustable over-travel, stops at optimum trigger face angle
• Smoother takeup and clean release sensation, with clean reset
• Preserves factory sear face engagement height and mechanical safety values
• Proven reliable and durable for high-volume professional use
• Limited lifetime warranty on materials and workmanship

Fit Guide

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer. Note – The safety lever spring is no longer needed in the P320, and is not included in the kit.

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P2000 or P30 without a thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P2000 and P30 models without a thumb safety, including DA/SA and LEM variations.

*Does not work with the CDA LEM 4.1 Triggers*

The kit works with all variants of the HK P2000 and P30 models without a thumb safety including:

• P30
• P30L
• P30SK
• P2000
• P2000SK

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

Our Short Reset System for the HK USP and HK45 replicates the short reset conversion available in our in-house custom action work. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK USP and HK45 models with or without a thumb safety, including DA/SA and LEM variations.

The parts provided – control catch, pin and spring – are designed to be installed together as a complete system.

Kits will not fit the following variants:

• Double Action Only pistols
• MK23
• Early USP models with joined one piece catch, control latch or models that have the short catch that stops the hammer rather than spur. These older versions are rare and usually easily identified because they lack the rubber coating on the hammer thumb stud.

Designed by Keith Hosey, Grayguns’ director of gunsmithing, the HK P30 Straight Trigger is a first-of-its-kind in the market. Fits all P30 variants. Reduces over-travel while featuring a 90-degree optimal trigger break.

The straight trigger design does allow for a lower finger placement and may provide the feel of reduced pull weight. The trigger design does not reduce pull weight.

Made in the United States to high-quality standards, guaranteeing the fit and finish Grayguns is known for. Precision machined from tool steel and properly heat treated for optimal wear resistance. Hand inspected and finished to assure a quality trigger we can stand behind for life.

Fit Guide

This trigger will fit all variations (LEM, DA/SA and SAO) of the HK P30 line of pistols. Including:

• P30
• P30L
• P30SK

Fully compatible with the Grayguns HK P30 Short Reset System and HK P30 (with Safety) Short Reset System.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

Grayguns introduces the P365AST Straight Trigger. Our team’s goal to optimize length of pull and reduce over travel, while keeping the toe of the trigger no more forward than the original starting position. We succeeded in that goal and more. This UpGray’d trigger now breaks at 90 degrees giving the operator a clean index while providing a wider area of finger placement. This trigger has a new over travel screw that can be adjusted to take out all of your wasted over travel.

Made in the USA from solid bar-stock steel, this trigger is backed by the Grayguns lifetime warranty. The Grayguns P365ST Straight Trigger sets the standard by which all others are judged.

The Grayguns P320 Adjustable Straight Trigger is the ultimate fire control refinement for this amazingly versatile platform, embodying the best innovations from Bruce Gray’s continuing R&D program with SIG Sauer®. Like all Grayguns Inc. products, proudly American made from precision machined tool steel, heat treated, hand finished and gauged for perfect appearance, fit and function.

Designed for hard duty use, with the toughness to outlast your pistol, our P320 triggers are Grayguns Grade and guaranteed for life.

P320 Trigger – Straight or Curved – Specifications and Features

• Adjustable over-travel eliminates gross movement after the sear is released, and reduces trigger travel to reset
• Enhanced Leverage geometry reduces pull weight by 30% with stock springs
• Smoother takeup, sear release and reset sensation
• Optimal 90⁰ sear release
• Supports Voluntary Upgrade rough handling characteristics for assurance and reliability

Fits all variations within the P320 (upgraded) system. Including all sizes, TACOPS Carry, X-VTAC, X-Carry, X-Five and RX versions.

This trigger was previously described as our Practical Enhanced Leverage Trigger (PELT).

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Weight Comparison – P320

• Brass (P320 Extended Pad) – 3.75 ounces
• Brass (P320 Standard) – 1.1 ounce
• Grayguns Hard Duty Use Aluminum Pads (P320) – About 1 ounce
• OEM P320 base pads – About .20 ounces

For the P320 series, base pads are designed to work with full-size magazines in X-Series grip modules with – and without – the magwell installed. Will work with 21-round magazines and will work with standard P320 grip modules.

Base pads are compatible with new SIG P320 magazines with the square pegs. 1 per package.

Replicate our custom in-house short reset conversion with a drop-in kit for your HK P30 with thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P30 model with a thumb safety, including DA/SA and LEM variations.

The kit works with all variants of the HK P30 with a thumb safety including:

• P30
• P30L
• P30SK

Will not work with CDA LEM 4.1 trigger.

The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.

The Grayguns proprietary enhanced leverage geometry reduces pull weight approximately 25 percent without compromising reliability or factory safety values. The trigger is dual-adjustable for pre and over-travel, which is what you’d expect from the Industry Leader, GGI.

Each Grayguns enhanced-geometry trigger bar is micro polished for superior smoothness and perfectly timed function. This is the Hybrid trigger shoe.

The trigger kit is engineered to provide several key benefits:

• Reduces the pull weight of double and single action without the need for spring replacements.
• Reduced over-travel
• Reduced pre-travel
• Maintains all factory safety functions.

The kit is 100 percent American made from precision machined heat treated tool steel.

100% American made from precision machined heat treated tool steel, then hand finished and treated with tungsten DLC for unlimited service life.

This kit is compatible with P226/229/228 pistols that have the larger DAK-capable frame window cut.

This can only be purchased as a complete system and REQUIRES the trigger AND the trigger bar in order to function.